©
American DJ® - www.americandj.com - UVLED Bar16 Instruction Manual Page 10
©
American DJ® - www.americandj.com - UVLED Bar16 Instruction Manual Page 9
UVLED Bar16 DMX Values & Functions - 3 Channels
Channel Value
Function
1 DIMMER
0 - 255 0% - 100%
2 PROGRAM SPEED
1 - 255 SLOW - FAST
3 PROGRAMS
0 - 30 DIMMING
31 - 61 STROBE
62 - 92 INCREASING INTENSITY
93 - 123 DECREASING INTENSITY
124 - 154 INCREASE - DECREASE INTENSITY
155 - 185 THREE FLASH
186 - 216 ONE AND TWO FLASH
217 - 247 FLASH
248 - 255 SOUND ACTIVE
UVLED Bar16 Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved;
Contact American DJ® for service.
1-800-322-6337
First unplug the power. Locate and remove the unit’s power cord.
Once the cord has been removed located the fuse holder located
inside the power socket. Insert a flat-head screw driver into the power
socket and gently pry out the fuse holder. Remove the bad fuse and
replace with a new one. The fuse holder has a built-in socket for a
spare fuse be sure not to confuse the spare fuse with active fuse.
UVLED Bar16 Fuse Replacement
