©
American DJ
®
- www.americandj.com - Shooting Star LED Instruction Manual Page 12
©
American DJ
®
- www.americandj.com - Shooting Star LED Instruction Manual Page 11
Master-Slave operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of
the unit. Use standard XLR microphone cables to link your
units together. Remember that the Male XLR connector is the
input and the Female XLR connector is the output. The first
unit in the chain (master) will use the female XLR connector
only. The last unit in the chain will use the male XLR
connector only.
2. You will also have to link the power cords to each other, as you
did with the XLR cables.
3. Using the Master unit, choose your desired mode and connect
the “Slave” unit or units.
4. Set the “Slave” unit(s) to the first address mode. So all “Slave”
units display “1001”. They will now follow the “Master” unit.
Sound Active Mode:
This mode allows a single unit or several units
linked together, to run to the beat of the music.
1. Tap the MENU button until
“
SOUN
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons until “ON” is displayed and press
ENTER, and then press and hold the MENU button to confirm.
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Show Mode:
This mode allows a single unit or several units linked
together, to run your desired factory show.
1. Tap the MENU button until
“
SHND
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons until you find your desired show,
and press ENTER, and then press and hold the MENU button to
confirm.
Shooting Star LED Operating Instructions
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns, dim-
mer and strobe. A DMX controller allows you to create unique pro-
grams tailored to your individual needs.
1. The Shooting Star LED is a 3 DMX channel unit. See pages 13-14
for a detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-6 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Shooting Star LED Operating Instructions
Blackout Blackout the unit
Function
1. SynchroStrobe
2. Asynchro Strobe
3. Sound Strobe
Select Show
(Show 1-8)
Select Speed
1. Slow
2. Middle
3. Fast
Mode
Sound/Strobe
(LED OFF)
Show
(LED ON)
LED blinking
Shooting Star LED UC3 Control