American DJ
®
- www.americandj.com - Saturn Tri LED™ Instruction Manual Page 10
American DJ
®
- www.americandj.com - Saturn Tri LED™ Instruction Manual Page 9
Saturn Tri LED™
System Menu
Saturn Tri LED™
System Menu
System Menu: When making adjustments you can press
ENTER to confirm your setup or you can wait 8 seconds for
automatic setup. To exit without making any adjustments
press the MENU button.
ADDR -
DMX Address Setting
.
1. Tap the either the MENU, UP, or DOWN buttons until “
ADDR
”
is displayed, press ENTER.
2. “
1
” will now be displayed and flashing. Press the UP or
DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
CHND -
This will let you the DMX Mode you want to run.
You can choose between 3 channel mode, 4 channel mode,
and 5 channel mode.
1. Tap the MENU button until “
CHND
” is displayed, press
ENTER. Either “
3CH
”, “
4CH
”, or “5
CH
” will be displayed.
2. Tap the UP or DOWN buttons until your desired DMX chan-
nel mode is displayed, press ENTER to confim. See page 7 for
DMX Channel modes and traits.
SLND -
This will let you set unit as a slave in a master/
slave configuration.
1. Tap the MENU button until “
SLND
” is displayed, press
ENTER. Either “
MAST
”, “
SL 1
”, “
SL 2
”, “
SL 3
”, or “
SL 4
” will be
displayed.
2. Tap the UP or DOWN buttons until your desired mode setting
is displayed, press ENTER to confim.
Note:
Each slave mode is a different light show.
NOTE:
In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to “
SL 2
”, the fixtures will
now have contrast movement to each other.
SOUN -
Sound Active mode.
1. Tap the MENU button until “
SOUN
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to activate sound active mode, or
“
OFF
” to deactivate sound active mode.
3. Press ENTER to confirm.
BLND -
Blackout or Stand by mode.
1. Tap the either the MENU button until “
BLND
” is displayed,
press ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now
be in Blackout mode. To deactivate Blackout mode, select No
and press Enter.
NANU -
In this mode you can manually choose a color or
you can choose color scroll.
1. Tap the MENU button until “
NANU
” is displayed, press
ENTER.
2. The display will show “
c1
” - “
c7
” or “
SCRO
”. Press the UP or
DOWN buttons to select one of the seven available colors (
c1-
c7
) or select color scroll (
SCRO
).
3. Press ENTER to confirm.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
