background image

2/12

User Instructions

Unpacking:

 

Thank you for purchasing the RGBW4C by American DJ

®

Every RGBW4C has been thoroughly tested and has been shipped in 

perfect operating condition. Carefully check the shipping carton for 

damage that may have occurred during shipping. If the carton appears 

to be damaged, carefully inspect your fixture for any damage and be 

sure all equipment necessary to operate the unit has arrived intact. In 

the event damage has been found or parts are missing, please contact 

our toll free customer support number for further instructions. Please 

do not return this unit to your dealer without contacting customer sup-

port first. 
Introduction:

 

The RGBW4C is a 32-channel RGB, RGBW or RGBA 

LED controller. Up to 8 LED fixtures or fixture groups can indepen-

dently be controlled via four fixture buttons. The units control panel 

includes; 9 “Static Color/Chase” buttons, which contain pre-pro-

grammed colors and chase programs, 3 programmable color preset 

buttons, 4 multi function faders that control RGBW intensities, as well 

as program speed, fade time, and master dimmer. There are 8 but-

tons used to select the operation mode, including RGB Fade, Auto 

Run, Color Macro, Chase, Sound Active, Strobe, Manual RGBW and 

Blackout modes. The RGBW4C is one of the simplest and most ver-

satile LED controllers available today. It is ideal for D.J.’s, nightclubs, 

lounges, bars, and anyone that wants easy control of LED Par’s, Bar’s, 

Flood’s, or Panel’s.  
Customer Support:
 American DJ

®

 provides a toll free customer sup-

port line, to provide help and to answer any question should you 

encounter problems during your set up or initial operation. You may 

also visit us on the web at www.americandj.com for any comments or 

suggestions. Service Hours are Monday through Friday 8:00 a.m. to 

4:30 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

RGBW4C                                         General Information

American DJ® www.americandj.com - RGBW4C    Page 2

Содержание RGBW4C









Отзывы: