background image

For Your Own Personal Safety, Please Read and Understand This 

Manual Completely Before You Attempt To Install Or Operate 

This Unit!

•   To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture
•   Do not spill water or other liquids into or on to your unit.
•   Be sure that the local power outlet match that of the required volt-
   age for your unit.
•   Do not attempt to operate this unit if the power cord has been 
   frayed or broken. 
•   Do not attempt to remove or break off the ground prong from    
   the electrical cord. This prong is used to reduce the risk of electrical  

   shock and fire in case of an internal short.

•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Never operate this unit when it’s cover is removed.
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out-
   doors voids all warranties.
•   Always mount this unit in safe and stable matter.
•   Power-supply cords should be routed so that they are not likely to  
   be walked on or pinched by items placed upon or against them,  
   paying particular attention to cords at plugs, convenience recep- 

   tacles, and the point where they exit from the appliance. 
• Cleaning -The fixture should be cleaned only as recommended by  

   the manufacturer. See page 14 for cleaning details.

•   Heat -This fixture should be situated away from heat sources such 

   as radiators, heat registers, stoves, or other appliances (including 
   amplifiers) that produce heat.

•   The fixture should  be serviced by qualified service personnel when:

    A. Objects have fallen, or liquid has been spilled into the appliance.

    B. The appliance has been exposed to rain or water.
    C. The appliance does not appear to operate normally or exhibits a  

     

  

 marked change in performance.

 Quad Gem DMX™  

 

              Safety Precautions

American DJ

®

  -  www.americandj.com  - Quad Gem DMX™ Instruction Manual Page 4

American DJ

®

  -  www.americandj.com  - Quad Gem DMX™ Instruction Manual Page 3

•   DMX-512 Protocol Compatible (Four or Seven DMX Channels)   
•  RGB + White
•  3 Operating Modes - Master/Slave; Stand Alone; Sound Active
•  Internal Microphone 
•  Digital Display for Address and Function Setting
•   UC3 Controller (Not Included)
•   12 Sound Active Shows
•   Power Cord Daisy Chain   

 Quad Gem DMX™  

 

 

                    Features

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact 
American DJ

®

.

American DJ

®

 will not accept any liability for any resulting damages 

caused  by  the  non-observance  of  this  manual  or  any  unauthorized 
modification to this unit.

  Quad Gem DMX™  

                  Handling Precautions

 Quad Gem DMX™   

                   Warranty Registration

The Quad Gem DMX™ carries a 3 year (1095 days) limited warranty. 
Please fill out the enclosed warranty card to validate your purchase 
and  warranty.  You  may  also  register  your  product  online  at  www. 
americandj.com. All returned service items whether under warranty or 
not, must be freight pre-paid and accompany a return authorization 
(R.A.) number. If the unit is under warranty you must provide a copy 
of your proof of purchase invoice. Please contact American DJ® cus-
tomer support for a R.A. number.

To  optimize  the  performance  of  this  product,  please  read  these 
operating  instructions  carefully  to  familiarize  yourself  with  the  basic 
operations  of  this  unit.  These  instructions  contain  important  safety 
information  regarding  the  use  and  maintenance  of  this  unit.  Please 
keep this manual with the unit, for future reference.

 Quad Gem DMX™  

 

           General Instructions

Содержание Quad Gem DMX









Отзывы: