Operating Modes:
You can use the P56P LED in four ways:
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs.
• Auto Mode - The unit will automatically chase through the different
colors.
• RGB Mode - Choose a single color or colors to stay static.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512
controller such as
as the Elation
®
Show Designer™.
Sound Active Mode:
In this mode the P56P LED will react to sound, and chase through the
different colors.
1. Plug the fixture in and put dipswitch #10 in the “ON” position.
2. The fixture will now change via sound.
Auto Mode:
1. Plug the fixture in and put dipswitches # 9 and 10 in the “ON”
position. Put dipswitch #8 in the “OFF” position
2. Adjust the speed by adjusting dipswitches 1-7.
RGB Mode:
1. Plug the fixture in and put dipswitches #8, 9, and 10 in the “ON”
position.
2. Dipswitch #1 alone will project Red at 25% intensity, dipswitch #2
alone will project Red at 50% intensity. Combine dipswitches 1 & 2
and Red will be projected at 100% intensity.
Dipswitch #3 alone will project Green at 25% intensity, dipswitch
#4 alone will project Green at 50% intensity. Combine dipswitches
3 & 4 and Green will be projected at 100% intensity.
Dipswitch #5 alone will project Blue at 25% intensity, dipswitch #6
alone will project Blue at 50% intensity. Combine dipswitches 5 & 6
and Blue will be projected at 100% intensity.
DMX Mode:
Operating through a DMX controller give the user the freedom to cre-
P56P LED Operating Instructions
©
American DJ Supply
®
- www.americandj.com - P56P LED Instruction Manual Page 8
©
American DJ Supply
®
- www.americandj.com - P56P LED Instruction Manual Page 7
ate their own programs tailored to their own individual needs. This
f
unction also allows you to use your fixtures as spot lights.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller such as the
Elation
®
Show Designer™ or the Elation
®
DMX Operator.™
2. The P56P LED uses six DMX channels to operate see page 9 for
the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller. Set your desired
DMX address following the set-up specifications that come with
your DMX controller.
P56P LED Operating Instructions
