ADJ Products, LLC - www.adj.com - TRIBAR Spot User Manual Page 11
ADJ Products, LLC - www.adj.com - TRIBAR Spot User Manual Page 12
TRIBAR Spot ADJ LED RC Operation
The
ADJ LED RC
infrared remote
(sold separately) has many dif-
fernet functions and gives you complete control of your TRIBAR Spot.
To control the your desired fixture you must aim the controller at the
front of the fixture and be no more the 30 feet away. To use the ADJ
LED RC you must first activate the fixtures infrared receiver, to acti-
vate the receiver please see the instructions on page 10.
BLACKOUT
-
Pressing this button will blackout the fixture.
AUTO RUN
-
This button will run an automatic program. You activate
strobing by pressing the FLASH button, then using the “+” or “-” to
adjust the flash rate. Press the FLASH button twice to enter the Fade
speed setting. Use the “+” or “-” to adjust the fade speed.
PROGRAM SELECTION
-
This button activates static color mode
and program mode. Pressing this button will switch between the two
modes.
In static color mode, use the “+” and “-” buttons to scroll through the
7 static colors. Press the Flash Button to activate strobing and use
the “+” & “-” buttons to adjust the strobe speed.
In built in program mode, use the “+” and “-” buttons to scroll through
the 22 different programs. Press the SPEED button and use the “+”
and “-” buttons to adjust the programs running speed. Press the
Flash Button to activate strobing and use the “+” & “-” buttons to
adjust the strobe speed. Press the FLASH Button twice to enter the
fade speed setting and use the “+” & “-” buttons to adjust the fade
speed.
FLASH
-
This button will activate the strobe effect. You can control
the flash rate by pressing the “+” and “-” buttons. Press this button
again to exit strobe mode.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the
speed of the built in programs.
DMX MODE -
This button will let you select which DMX mode you
want to use. Some fixtures will come with different DMX channel
modes. This button will switch between the different modes. Please
see pages 15-22 for DMX modes, values, and traits.
SOUND ACTIVE -
This button activates sound active mode. Use the
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave
mode. In Master-Slave operation one unit will act as the controlling unit
and the others will react to the controlling units built-in programs. Any
unit can act as a Master or as a Slave however, only one unit can be pro-
grammed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR data cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR con-
nector is the ouput. The first unit in the chain (master) will use the
female XLR connector only. The last unit in the chain will use the
male XLR connector only.
2.
Set the “Master” unit to your desired operating mode and then
connect the “Slave” unit or units.
3. For the “Slave” unit(s) press the MODE button until “SLAu” is dis-
played. The “Slave” unit(s) will now follow the “Master” unit.
TRIBAR Spot Master-Slave Configuration
