©American DJ® - www.americandj.com - MB DMX II™ Instruction Manual Page 13
MB DMX II™
DMX Traits
©American DJ® - www.americandj.com - MB DMX II™ Instruction Manual Page 14
MB DMX II™
Dipswitch Settings
Dipswitch Function Settings
Dipswitches 1
~ 8 Used to change the rotation speed during
Stand-Alone or Master/Slave mode
Master Motor Speed List
Switch
Speed
DIP1
DIP2
DIP3
DIP4
DIP5
DIP6
DIP7
DIP8
ON
ON
ON
ON
ON
ON
ON
ON
-
-
-
-
-
-
-
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SPEED1 (0.5 rpm)
SPEED8 (5rpm)
SPEED2 (1 rpm)
SPEED3 (1.5 rpm)
SPEED4 (2 rpm)
SPEED5 (2.5 rpm)
SPEED6 (3 rpm)
SPEED7 (4 rpm)
Dipswitch 9 Control Rotation Direction;
On = CW Rotation / Off = CCW Rotation
Dipswitch 10 Controls Master/Slave Operation;
On = Master / Off = Slave
Note:
Dipswitch 10 must be in the off postion for DMX operation
" - " = Dip Switch Off
The
optional
MINI/C may be used during Master/Slave
operation to stop motor rotation and to blackout the
electrical sockets
The chart below details the DMX traits in depth. The individual trait
can only be accessed by using an universal DMX controller. Note:
“Lamp” in channel 1 refers to the two power sockets located on the
side of the motor (these sockets are intended to be used with lamps
to light up the mirror ball).
The charts below details the Master/Slave setting for Master/Slave
configuration. Use this configuration when you will be using two or
more fixtures in a Master/Slave configuration. Note: The “Master” set-
tings should only be used once at the first motor, using the “master”
setting more than once in the chain may result in erratic operation.