background image

ADJ Products, LLC  -  www.adj.com  - LED UV GO Instruction Manual Page 7

ADJ Products, LLC  -  www.adj.com  - LED UV GO Instruction Manual Page 8

  LED UV GO                                                   System Menu

BLND

 - This will control blackout

1.  Press  the  MENU  button  until  “BLND” is displayed, press 

ENTER.

2. Either “YES” or “NO” will now be displayed. Press the UP or 

DOWN buttons to select one or the other. 
3. Press ENTER, and then press and hold the MENU button for at 

least three seconds to confirm.

LED

 - With this function the LED display will turn off after 

2 minutes.

1. Press the MENU button until “LED” is displayed, press ENTER.
2. Either “ON” or “OFF” will now be displayed. Press the UP or 

DOWN buttons to select “ON” to keep the LED display on at all 

times, or “OFF” to allow the LED display to turn off after 2 min-

utes. Press any button to turn on the LED display again.  
3. Press ENTER, and then press and hold the MENU button 

for at 

least three seconds

 to confirm.

DISP

 - This will “flip” the LED display 

1. Press the MENU button until “DISP” is displayed, press 

ENTER.
2. When “DISP” is displayed the LED display will remain normal, 

when “DSIP” is displayed, the LED display will be “flipped”. 

Use the ENTER button to find your desired display set up, then 

press MENU to confirm and exit.

BATT

 - This function is used for checking the battery 

status and battery charging.

1. Press the MENU button until “BATT” is displayed, press 

ENTER.

  LED UV GO                                                   System Menu

2. Either “CHAR”, “LOAD”, or “STAT” will be displayed. Use the 

UP or DOWN buttons to scroll through the functions, and press 

ENTER to select your desired function.
• CHAR  (Charging) - When this is selected you are able to charge 

or stop charging the battery. When a power cable is connected 

and “ON” is selected, the battery is now being charged. To stop 

charging, select “OFF”.
• LOAD (LED On or OFF) - This will let you blackout the LED while 

charging. Select “OFF” to blackout the LED or “ON” to stop the 

LED blackout.
• STAT (Charge Status) - This will let you check the battery status.   
3. Press ENTER to confirm your setting and exit.

FHRS

 - With this function you can display the running 

time of the unit.

1. Press the MENU button until “FHRS” is displayed, press 

ENTER.
2. The running time of the fixture will now be displayed. Press 

MENU to exit.

VER

 - This will display the software version

1.  Press  the  MENU  button  until  “VER”  is  displayed.  Press  the 

ENTER button and the software vesion will be displayed. 
2. Press the MENU button to leave this function.

Содержание LED UV GO









Отзывы: