American DJ® www.americandj.com - LED Touch Page 10
American DJ® www.americandj.com - LED Touch Page 9
LED Touch™ Running A Chase
LED Touch™
Select A Scene In A Chase
RUNNING A CHASE:
1. Turn on the LED Touch, and it will enter its last running mode or
timing mode directly.
2. There are 3 function modes: Auto Mode, Manual Mode, and
Timing Mode.
A. Auto Mode - Auto Mode is the default mode. Press the CHASE
button, and then press either the UP or DOWN buttons or turn the
JOG WHEEL to select a chase, it will run automatically and the
LCD will display “CXX SNXX/AUTO”.
B. Manual Mode - Press the CHASE button, and then press either
the UP or DOWN buttons or turn the JOG WHEEL to select a
chase.
To enter Manual mode press the SCENE button. The LCD will
display “CXX SNXX/MANUAL”. You can now move through the
Scenes using the UP or DOWN buttons or the JOG WHEEL.
To switch to another Chase, press the CHASE button, then
choose your desired chase and press the SCENE button to reen-
ter Manual mode.
C. Music Mode - The Chase will run to the beat of music.
3. You can press the BLACKOUT button at anytime to enter Blackout
mode and stop light output immediately.
9. Repeat steps 3-8 to set more scenes.
10. When you are finished setting up your desired chase, press and
hold the PROGRAM/REC button for 3 seconds to exit the pro-
gram.
LED Touch™
Program A Chase
1. Press the CHASE button, and then press either the UP or DOWN
buttons or turn the JOG WHEEL to select a chase.
2. Enter Manual mode by presssing the SCENE button. The LCD will
display “CXX SNXX/MANUAL”. You can now find your desired
Scene using the UP or DOWN buttons or the JOG WHEEL.
LED Touch™
Manual Mode
1. Press either the COLOR, FADE, or MACRO buttons to enter
Manual mode.
2. Select your desired fixtures, 1-6, that you would like to operate.
3. Select your desired effect, by pressing either COLOR, FADE, or
MACRO.
COLOR - Choose built-in color by using the UP or DOWN buttons or
turning the jog wheel.
FADE - Use the jog wheel to adjust the fade speed (0s-90m).
MACRO - Select one of 24 macros, and adjust the fade time or
hold time. Press MENU/FADE TIME to adjust the fade time, or press
ENTER/HOLD TIME to set the hold time.
4. In COLOR, FADE, or MACRO mode, you can press the DIMMER
button to adjust.
LED Touch™
Stand Alone Mode
When this mode is activated, the DMX signal will be cut, and the
light will run its own internal program.
1. Hold the BLACKOUT button for 3 seconds to enter Blackout
mode. The LCD will display “STAND ALONE” with the Blackout
LED blinking. The lights will now run the last mode it was set to.
Example: Before the light was connected to the controller, the light
was running in sound active mode. When the the controller goes
to the “Stand Alonde” mode, sound active mode will begin to run
again.
2. Press the BLACKOUT button again to exit Blackout mode