American DJ Inno Spot LED, Инструкция пользователя

Страница: 6 / 12

ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 11
ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 12
I TLT -
Tilt Inversion
1. Press the MENU button until “ I TLT ” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons until
I is displayed, press ENTER to confim. To deactivate Tilt inversion,
select No and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “ LED ” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to keep the LED display on at all
times, or “ OFF ” to switch to have the LED display switch off after 10
seconds.
3. Press ENTER to confirm. To make you LED display reappear again
press any button.
DISP -
This function will reverse the display 180º.
1. Press the MENU button until “ DISP ” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it again.
Press ENTER when you have made your desired setup.
FADJ
- This function will allow you to focus the lens for a
clear LED output.
1. Press the MENU button until “ FADJ ” is displayed, press ENTER.
The fixture will turn a different way each time the ENTER button is
pressed.
2. With the spot pointed at a flat wall or surface, at the distance it will
be set up, you can turn the lens to adjust the clarity. Press MENU to
exit.
Inno Spot LED System Menu
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Press the MENU button until “ SLND ” is displayed, press ENTER.
Either “ SL 1 ” or “ SL 2 ” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture to
Master and then set the next fixture to “ SL 2 ”, the fixtures will now
have contrast movement to each other.
SOUN -
Sound Active mode.
1. Press the MENU button until “ SOUN ” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to activate sound active mode, or
“ OFF ” to deactivate sound active mode.
3. Press ENTER to confirm.
BLND -
Blackout or Stand by mode.
1. Press the MENU button until “ BLND ” is displayed, press ENTER.
Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes” is
displayed, press ENTER to confim. The fixture will now be in Blackout
mode. To deactivate Blackout mode, select “No” and press Enter.
I PAN -
Pan Inversion
1. Press the MENU button until “ I PAN ” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons until
I is displayed, press ENTER to confim. To deactivate Pan inversion,
select No and press Enter.
Inno Spot LED System Menu