ADJ Products, LLC - www.adj.com - Inno Spot Elite Instruction Manual Page 15
ADJ Products, LLC - www.adj.com - Inno Spot Elite Instruction Manual Page 14
Back Light
- With this function you can make the back-
light automatically turn off after one minute.
1. Press the MENU button until “Back Light” is displayed, press
ENTER.
2. Either “ON” or “OFF” will now be displayed. Press the UP or
DOWN buttons to select “ON” to keep the backlight on at all
times, or “OFF” to allow the backlight to turn off after 2 minutes.
Press any button to turn the backlight on again.
3. Press ENTER to confirm.
Focus Adjust
- With this function you can adjust the
focus.
1. Press the MENU button until “Focus Adjust” is displayed,
press ENTER.
2. A number between 0-255 will be displayed. This number rep-
resents the focus setting. Use the UP or DOWN buttons to adjust
the focus to your desire.
3. When you have found your desired setting press ENTER to
confirm.
Auto Test
- This function will run a self test program.
1. Press the MENU button until “Auto Test” is displayed, press
ENTER.
2. The fixture will now run a self test. Press the MENU button to
exit.
Temp.
- With this function you can display the running
temperature of the unit.
1. Tap the MENU button until “Temp.” is displayed, press
Inno Spot Elite
System Menu
ENTER.
2. The current running temperature of the fixture will now be
displayed. Press MENU to exit.
Fixture Time
- With this function you can display the
running time of the unit.
1. Tap the MENU button until “Fixture Time” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
Fixture Version
- This will display the software version
1. Tap the MENU button until “Fixture Version” is displayed. Press
the ENTER button and the software vesion will be displayed.
2. Press the MENU button to leave this function.
Reset
- Use this function to reset the unit.
1. Tap the MENU button until “Reset” is displayed, press
ENTER.
2. The fixture will now reset.
Inno Spot Elite
System Menu