©
American DJ
®
- www.americandj.com - Galaxian Royale Instruction Manual Page 12
©
American DJ
®
- www.americandj.com - Galaxian Royale Instruction Manual Page 11
SLND -
This will let you set your unit as a slave in a
master/slave configuration.
1. Tap the MENU button until “
SLND
” is displayed, press
ENTER. Either “
SL 1
” or “
SL 2
” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER and then hold MENU for at least 2-3
seconds to confim.
Note: In a Master/Slave configuration you can make one
fixture the Master and then set the next fixture to “
SL 2
”, the
fixtures will now have contrast movement to each other.
SOUN
- In this mode you can run the unit in sound active
mode
1. Tap the MENU button until “
SOUN
” is displayed, press ENTER.
2. Either “
ON
” or “
OFF
” will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. When you have made your selection, press the ENTER, and then
press and hold the MENU button for at least 3 seconds to confirm.
BLND -
Blackout or Stand by mode.
1. Tap the MENU button until “
BLND
” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “
LED
” is displayed, press ENTER.
Galaxian Royale System Menu
Galaxian Royale
System Menu
Galaxian Royale System Menu
System Menu: When confirming your setting press eNteR
and then hold MeNU for at least 2-3 seconds, or you can
wait 1 minute for automatic setup. to exit without making
any adjustments press the MeNU button.
ADDR -
DMX Address Setting
.
1. Tap the either the MENU, UP, or DOWN buttons until “
ADDR
”
is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
