©
American DJ
®
- www.americandj.com - Galaxian Gem LED Instruction Manual Page 12
©
American DJ
®
- www.americandj.com - Galaxian Gem LED Instruction Manual Page 11
System Menu: When making adjustments press ENTER
to confirm your setup and then press and hold the MENU
button for at least 3 seconds. To exit without making any
adjustments press the MENU button.
ADDR -
DMX Address Setting
.
1. Press the MENU, UP, or DOWN buttons until “
ADDR
” is displayed,
press ENTER.
2. The current address will now be displayed and flashing. Press the
UP or DOWN buttons to find your desired address. When you have
found your desired address press ENTER.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Press the MENU button until “
SLND
” is displayed, press ENTER.
“
MSTR
”, “
SL 1
” or “
SL 2
” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to confim and exit.
NOTE: In a Master/Slave configuration you can make one fixture the
Master and then set the next fixture to “
SL 2
”, the fixtures will now
have contrast movement to each other.
SHND: SH
0
-
SH8
- Show modes 0-8 (Factory programs).
Show mode can run with or without sound active mode.
1. Press the MENU button until “
SHND
” is displayed, press ENTER.
2. “
S
h
X
” will now be displayed, “X” representing a number between
0-8. Programs 1-8 are factory programs, while “
S
h
0
” is random mode.
Press the UP or DOWN buttons to find your desired show.
3. When you have found your desired show press ENTER, then press
and hold the MENU button for at least 3 seconds to activate.
Galaxian Gem LED
System Menu
Galaxian Gem LED
System Menu Chart
