©
American DJ Supply
®
- www.americandj.com - FREQ 5 Strobe Instruction Manual Page 9
©
American DJ Supply
®
- www.americandj.com - FREQ 5 Strobe Instruction Manual Page 10
FREQ 5 Strobe System Menu
Manual show is used in conjunction with knobs located on
the rear of the unit.
NOTE: When running the fixture as a
single fixture, it must be set to the Master setting.
See page 14 for Master setting.
1. Press the MENU button until “
SHND
” is displayed, press ENTER.
2. “
SH
X
” will now be displayed, “X” representing a number
between 0-12 or “
MANU
” will be displayed. Shows 1-12 are preset
shows, while “
SH
0
” is random show. “
MANU
” is Manual mode, in
this mode you adjust the dimmer and strobe to your desire using
the knobs located on the rear of the unit. Press the UP or DOWN
buttons to find your desired show.
3. Once you have found your desired show press ENTER, and
then press and hold the MENU button for at least 3 seconds to
confirm.
SOUN
- In this submenu you can activate sound active
mode.
NOTE: When running the fixture as a single fixture, it
must be set to the Master setting.
See page 14 for Master setting.
1. Press the MENU button until “
SOUN
” is displayed, press ENTER.
2. Either “
ON
” or “
OFF
” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. When you have made your selection, press the ENTER, and
then press and hold the MENU button for at least 3 seconds to
confirm.
SENS
-
Sound sensitivity control.
1. Press the MENU button until “
SENS
” is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sensi-
tive and 100 the most sensitive.
FREQ 5 Strobe System Menu
3. Press the ENTER, and then press and hold the MENU button for at
least 3 seconds to confirm.
MANU
- In this mode you can manually control the dimmer
and strobe rate. Unlike the Manual show located under the
Show Mode submenu, this Manual mode is NOT USED with
the knobs located on the rear of the unit.
1. Press the MENU button until “
MANU
” is displayed, press ENTER.
2. Either “
DIMM
” or “
STRO
” will now be displayed. Press the UP or
DOWN buttons to switch between either setting.
3. When you have decided on what setting you would like to
adjust first, press the ENTER button. Use the UP and DOWN
buttons to make adjustments. Once you have made your desired
adjustments press ENTER.
4. Once you have finished with your adjustments DO NOT leave
this function. If you press the MENU button, all adjustments will
be lost and you will have to start over.
BLND
- In this submenu you can activate blackout
1. Press the MENU button until “
BLND
” is displayed, press ENTER.
2. Either “
YES
” or “
NO
” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER to confirm your selection.
LED
- With this function the LED display will turn off after 2
minutes.
1. Press the MENU button until “
LED
” is displayed, press ENTER.
2. Either “
ON
” or “
OFF
”
will now be displayed. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at all