background image

©

American DJ

®

  -  www.Americandj.com  - Flat Par QWH12 User Manual Page 11

©

American DJ

®

  -  www.Americandj.com  - Flat Par QWH12 User Manual Page 12

  Flat Par QWH12                          ADJ LED RC 2 Operation

The 

ADJ LED RC 2

 infrared remote

 

(sold seperately) has many dif-

fernet functions and gives you complete control of your Flat Par 

QWH12. To control the your desired fixture you must aim the control-

ler at the front of the fixture and be no more the 30 feet away. To use 

the ADJ LED RC 2 you must first activate the fixtures infrared receiv-

er, to activate the receiver please see the instructions on page 10.

BLACKOUT

 

-

 Pressing this button will blackout the fixture.

PROGRAM SELECTION

 

-

 This button will let you access the 4 built-

in running modes; static color mode, color fade mode, color change 

mode, and both color fade & color change modes. Each press of the 

button will switch to the next running mode.
•  When  the  Red  LEDs  flash  2  times,  this  indicates  that  you  are  in 

Static  Color  mode.  Use  the  “+”  &  “-”  buttons  to  scroll  through  the 

static colors, or press two numbers to choose 1 of the 15 static col-

ors. Press FLASH button to activate strobing and use the “+” & “-” 

buttons to adjust the flash rate.

Example: Press “0-3” to select static color 3 or press “1-2” to select 

static color 12. 
• When the Green LEDs flash 2 times, this indicates that you are in 

Color Fade & Color Change mode. Press SPEED button and use the 

“+” & “-” buttons to adjust the fade/change speed.
•  When  the  Blue  LEDs  flash  2  times,  this  indicates  that  you  are  in 

Color Fade mode. Press SPEED button and use the “+” & “-” buttons 

to adjust the color fade speed.
• When the White LEDs flash 2 times, this indicates that you are in 

Color Change mode. Press SPEED button and use the “+” & “-” but-

tons to adjust the color change speed.

FLASH

 

-

 This button will activate the strobe effect. You can control 

the flash rate by pressing the “+” and “-” buttons. Press this button 

again to exit strobe mode.

SPEED

 

-

 Press this button to activate and use the “+” & “-” buttons 

to adjust the speed of color fade and color change mode, color fade 

mode, color change mode, and the sound sensitivity level.

DMX MODE -

 This button will let you select which DMX mode you 

Master-Slave Operation:

 

This function will allows you to link units together to run in a Master-

Slave configuration. In a Master-Slave configuration one unit will act 

as the controlling unit and the others will react and copy the control-

ling units operation. Any unit can act as a Master or as a Slave how-

ever, only one unit can be programmed to act as the “Master.”

 

Master-Slave Connections and Settings:

1.   Daisy chain your units via the XLR connector on the rear of the 

  unit. Use standard XLR data cables to link your units together.  

   Remember that the Male XLR connector is the input and the Fe- 

  male XLR connector is the ouput. The first unit in the chain 

  (master) will use the female XLR connector only. The last unit in  

  the chain will use the male XLR connector only. 

2.   Connect the first “Slave” unit to the “Master.”

3.   Set the “Master” unit to your desired mode of operation. The    

    “Slave” unit will now follow the “Master”. 

  Flat Par QWH12                              Operating Instructions

With  this  feature  you  can  connect  the  fixtures  to  one  another 

using the IEC input and output sockets. The quantity that can be 

connected is 7 fixtures maximum. After 7 fixtures you will need to 

use a new power outlet. They must be the same fixtures. DO NOT 

mix fixtures.

  Flat Par QWH12                           Power Cord Daisy Chain

Содержание Flat Par QWH12















Отзывы: