American DJ
®
USER INSTRUCTIONS
FLASH 2C
-
Flash Tube Controller
FEATURES:
• THREE TRIGGER OPTIONS: AUDIO, MANUAL, AND AUTOMATIC
• PUSH BUTTON CONVENIENCE
• 19” RACK MOUNT, LED DISPLAY
• 4 FLASH PATTERNS: DOWN AND BACK, CRISSCROSS, BACK TO FRONT, AND FRONT TO
BACK
• SPEED AND RATE CONTROL
CONTROLS AND FUNCTIONS:
1.
MASTER ON/OFF SWITCH -
Press this button to switch the controller on and off.
2. LINE ON/OFF SWITCHES -
These are on/off switches for the 4 flash tube lines.
3. BUTTON -
This button will activate the down and back pattern.
4
.
BUTTON -
This button will activate the crisscross pattern.
5. BUTTON -
This button will make the flash tubes run from the last tube to the first tube in
the line.
6. BUTTON -
This button will make the flash tube run from the first tube to the last tube in
the line.
7. SYNC BUTTON -
Activates all 4 flash tube lines.
8. FLASH BUTTON -
This button will activate the fastest speed and rate times.
9. AUTO BUTTON -
This button will activate each flash tube line one-by-one. Starting with line 1,
then line 2, etc.....
10. MANUAL BUTTON -
This button allows you to manually trigger flash tube runs. First press this
button, and then press the trigger buttton to activate the runs.
11. SPEED CONTROL -
With this knob you can control the speed of the flash tube patterns.
12. AUDIO BUTTON -
This button activates sound active mode.
13. RATE CONTROL -
With this knob you can control the time of the flash in the flash tubes.
14. TRIGGER BUTTON -
This will activate a run when the controller is in Manual mode.
© AMERICAN DJ® LOS ANGELES, CA 90058
1
2
8
7
6
5
4
3
13
12
11
10
9
14
