ADJ Produc
t
s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 9
Event Bar Pro
System Menu
DMX Address
-
Set the DMX Address -
1. Press the MENU button until “DMX Addresss” is displayed,
press ENTER.
2. “X” will now be displayed, “X” represents the displayed
address. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm, and then press and hold the MENU
button
for at least three seconds
to assign.
Channel Mode
- This will let you select your desired
DMX Channel mode.
1. Press the MENU button until “Channel Mode” is displayed,
press ENTER.
2. “X Chan” will now be displayed, “X” represents the displayed
DMX channel mode. Press the UP or DOWN buttons to find your
desired Channel mode.
3. Press ENTER to confirm.
Slave Mode
- This will let you set your unit as a master
or slave in a master/slave configuration.
1. Press the MENU button until “Slave Mode” is displayed,
press ENTER. Either “Master”, “Slave 1” or “Slave 2” will be
displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, and press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to “Slave 2”, the fixtures
will now have contrast movement to each other.
Event Bar Pro
System Menu
ADJ Produc
t
s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 8