background image

User Instructions

©

American DJ

®

 - www.americandj.com - Emerald Scan II Instruction Manual Page 2

Introduction:

 

Thank you for purchasing the American DJ

®

 Emerald 

Scan II. The Emerald Scan II is a DMX intelligent, laser effect that cre-
ates multiple patterns. This unit can be used as a stand alone, sound-

active  unit  or  in  a  Master/Slave  configuration.  The  unit  can  also  be 

controlled via DMX controller. For a dramatic laser show use several 
Emerald Scan II’s together. This piece is best used with a fog or haze 
machine to enhance the beam output.

Unpacking:

 

Every Emerald Scan II has been thoroughly tested and 

has been shipped in perfect operating condition. Carefully check the 
shipping carton for damage that may have occurred during shipping. 
If  the  carton  appears  to  be  damaged,  carefully  inspect  the  unit  for 
any damage and be sure all accessories necessary to operate the unit 
have arrived intact. In the event damage has been found or parts are 
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return the unit to your dealer without 

first contacting customer support.

 

Customer  Support:

 

American  DJ

®

  provides  a  toll  free  customer 

support line, to provide set up help and  to answer any question should 
you  encounter  problems  during  your  set  up  or  initial  operation.  You 
may  also  visit  us  on  the  web  at  www.americandj.com  for  any  com-
ments or suggestions. 

For service related issue please contact Ameri-

can DJ

®

.

 Service Hours are Monday through Friday 9:00 a.m. to 5:00 

p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution! 

There are no user serviceable parts inside this unit. Do not 

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may  require  service  please 
contact American DJ customer support.

PLEASE recycle the shipping carton whenever possible.

  Emerald Scan II    

 

          General Introduction

    Rev. 10/09

Содержание Emerald Scan II









Отзывы: