DR. DMX Instructions page 2 of 2
OPERATING INSTRUCTIONS
Make sure fresh batteries are in unit or a proper type ac adapter is used.
1.Press andd hold POWER key(Fig. 4) for 1 sec. LCD will come on.
2.Select DMX channel of unit to be tested (e.g. if you need channel 16 press number key 1 & 6 (Fig.
10) ) then press YES key (Fig. 12) for conformation.
3.Adjust FADER SLIDE(Fig. 3) or press FLASH key (Fig, 11) (The FLASH key is the same as maxi-
mum position on the FADER SLIDE).
If you pressed the wrong number and pressed the YES key, you can delete the wrong number.
Enter the number you want to delete then press clear to delete that number
4. If you need more than one channel activated (e.g. you want to see the color wheel selection so
you need the shutter open and the lamp on) Select the shutter channel (step 2
