©
American DJ
®
- www.americandj.com - Double Roller Instruction Manual Page 9
©
American DJ
®
- www.americandj.com - Double Roller Instruction Manual Page 10
Double Roller
Operation
tivity knob on the bottom of the unit to make
the unit more or less sensitive to sound. Turning the sensitivity knob
in the clockwise direction will increase the sensitivity, turning the
knob in the counter-clockwise direction will decrease the fixture’s
sensitivity to sound.
3. The optional
BC 30
Controller (Not Included)
may be used with
in this operation for blackout, program modes, and program
effects. See the bottom of this page for BC 30 controls.
Master-Slave Operation (Sound Active or Internal Program):
This function will allow you to link up to 16 units together and operate
without a controller. The units will be sound activated. In Master-Slave
operation one unit will act as the controlling unit and the others will
react to the controlling units programs. Any unit can act as a Master
or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. For longer cable runs we suggest a
terminator at the last fixture.
2. Simply daisy chain the units together using XLR cables.
3. For the Master unit put dipswitch #1 in the “On” position, and all
other dipswitches in the “Off” position. For the Slave units, put
any dipswitches in the “On” position, except, the #1 dipswitch.
The #1 dispswitch must stay in the “Off” position on all Slave
units.
3. The optional
BC 30
Controller (Not Included)
may be used with in
this operation for blackout, program modes, and program effects.
See the bottom of this page for BC 30 controls.
Note: In Stand-Alone and Master-Slave Sound Active operation the
units will blackout to conserve lamp life when a sound source is not
received.
Double Roller
DMX Traits
Channel
Value
Function
1
0 - 255
PAN
2 0 - 255 TILT
3 GOBO/COLOR WHEEL
0 - 11 SPOT
12 - 23 GOBO 1/PINK & GREEN
24 - 34 GOBO 2/ORANGE
35 - 46 GOBO 3/RED & GREEN & BLUE
47 - 58 GOBO 4/LIGHT GREEN
59 - 69 GOBO 5/PINK
70 - 81 GOBO 6/RED, BLUE, GREEN &
ORANGE
82 - 93 GOBO 7/MAGENTA
94 - 104 GOBO 8/BLUE
105 - 116 GOBO 9/BLUE & MAGENTA
117 - 127 GOBO 10/GREEN
128 - 255 GOBO/COLOR WHEEL CHANGE
SLOW FAST
4 SHUTTER/STROBE/SHAKE/SWITCH
0 - 7 BLACKOUT
8 - 15 SHUTTER OPEN
16 - 131 STROBING
SLOW FAST
132 - 247 GOBO SHAKE
SLOW FAST
248 - 255 SHUTTER OPEN
Channels 5-8 are the same as channels 1-4. Channels 1-4
will control the right side of the fixture. Channels 5-8 will
control the left side of the fixture.
St and by
Blackou t the un it
Func tion
St ro be
1. sync. s trob e
2. two-ligh t stro be
X/Y m oving patte rn
selection
(6 pat terns)
Color/G ob o selection
Mode
St ro be/ So und
(LE D off)
Pa ttern/ So und
(LE D blinking)
So und
(LE D on)
