background image

©

American DJ

®

  -  www.americandj.com  - Accu UFO PRO Instruction Manual Page 22

American DJ

®

  -  www.americandj.com  - Accu UFO PRO Instruction Manual Page 21

 Accu UFO PRO   

 

 

            System Menu

3. Tap the UP button until “

MIC

” is displayed, press ENTER.

4. The display will show “

M-01

”.  

5. Press the UP or DOWN button to adjust the microphone sen-
sitivity between “

M-01 - M-99

”.

6. Press ENTER to confirm when you have reached your 
desired microphone sesitivity level.
7. Press MODE/ESC to return to the main menu.

DISP  

MAIN MENU -

VALU  

Display the DMX-512 value of each channel -

1. Access the main menu.
2. Tap the UP button until “

DISP

” is displayed, press ENTER.

3. Tap the UP button until “

VALU

” is displayed, press ENTER.

4. The display should show “

D-00

”. Press the UP button in 

order to select the desired channel. If you select “

D-05

” the 

display will only show the DMX value of the 5th channel 
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.

Now the display will change as per the 5th channel DMX 

value.

D ON

  With this function “On” the display will shut off after 

2 minutes -

1. Access the main menu.
2. Tap the UP button until “

DISP

” is displayed, press ENTER.

3. Tap the UP button until “

D ON

” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “

ON

” to acti-

 Accu UFO PRO   

 

 

            System Menu

FINE  

MENU -

FINE

 - 

Switch between 8bit (coarse) and 16bit (fine) pan & 

tilt movement. This also switches the DMX Channel mode 

between 8 channel (8 bit) and 10 channel (16 bit) DMX 

mode.

1. Access the main menu.
3. Tap the UP button until “

FINE

” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “

ON

” (10 

Channel Mode) to activate this function, or “

OFF

” (8 Channel 

Mode) to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.

DEGR  

MENU -

DEGR

 - 

With this function you can switch the Pan degree 

between 360° and 540°.

1. Access the main menu.
2. Tap the UP button until “

DEGR

” is displayed, press ENTER.

3. Press the UP or DOWN buttons to select either “

360

” or 

540

”.

4. Press ENTER to confirm your selection.
5. Press MODE/ESC to return to the main menu.

MIC  

MENU -

MIC

 - 

The internal microphone can be made more or less 

sensitive.

1. Access the main menu.

Содержание Accu UFO PRO























Отзывы: