background image

 Accu Spot Pro 

 

 

 

             System Menu

American DJ

®

  -  www.americandj.com  - Accu Spot Pro Instruction Manual Page 20

American DJ

®

  -  www.americandj.com  - Accu Spot Pro Instruction Manual Page 19

4. Press ENTER to reset the pan/tilt motors, or press MODE/
ESC to cancel and return to the main menu.

COLR

 - When you activate this reset function, the fixture 

will only reset the color wheel motor.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

COLR

” is displayed. 

4. Press ENTER to reset the color wheel motor, or press MODE/
ESC to cancel and return to the main menu.

GOBO

 - When you activate this reset function, the fixture 

will only reset the gobo wheel motor.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

GOBO

” is displayed. 

4. Press ENTER to reset the gobo wheel motor, or press MODE/
ESC to cancel and return to the main menu.

SHTR

 - When you activate this reset function, the fixture 

will only reset the shutter/dimmer motor.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

SHTR

” is displayed. 

4. Press ENTER to reset the shutter/dimmer motor, or press 
MODE/ESC to cancel and return to the main menu.

OTHR

 - When you activate this reset function, the fixture 

will reset all other motors that are not listed in RESET 

menu.

 Accu Spot Pro 

 

 

 

             System Menu

5. Select the mode that you want the fixture to run in case of a 

lost DMX signal and press ENTER.

LAMP 

MAIN MENU -

ON/OFF

 - With this function you can manually switch the 

lamp on and off.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

LAMP

” is displayed, press ENTER.

3. Press the UP or DOWN buttons to select either “

ON

” to acti-

vate this function, or “

OFF

” to deactivate this function.

4. Press ENTER to confirm.

5. Press MODE/ESC to return to the main menu.

RESE 

MAIN MENU -

ALL

 - When you activate the reset function, the fixture will 

begin the reset motion.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

ALL

” is displayed. 

4. Press ENTER to reset all motors, or press MODE/ESC to 
cancel and return to the main menu.

SCAN

 - When you activate this reset function, the fixture 

will only reset the pan/tilt motor.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

SCAN

” is displayed. 

Содержание Accu Spot Pro



























Отзывы: