Maintenance
10-4
EXTERIOR SEALANTS
Consult your American Coach Motor Home
Dealer for the most current sealant use.
• Windshield
• Window sealant
• Roof Sealant
• Vents
• A/C Gasket
• Exterior Trim & Lights
• Skylights
DOOR, WINDOW, ROOF
COMPONENT AND MOLDING
RESEALING
Inspect the sealants around windows, floors,
joints and doors at least every three months.
Also inspect roof vents, other roof components,
moldings at front and rear caps, and perimeter
molding. If any of the following defects are
evident during inspection, the affected areas
must be resealed.
• Sealant cracked or peeling.
• Void or missing sealant.
If you find any of the above defects:
1. Clean all areas to be resealed with an
appropriate cleaner and clean rags.
2. Make sure that all areas to be resealed are
absolutely dry before new sealant is applied.
INTERIOR
Fabrics
Interior appointments such as draperies,
bedspreads, mattress covers, upholstery and
wall decorations are manufactured from high
quality materials and should be dry cleaned
only. Frequent vacuuming will keep them free
of dust and dirt. Minor spills should be cleaned
up quickly to avoid staining. The affected area
should be blotted, not rubbed, to prevent the
stain from working deeper into the fabric.
Avoid frequent washing of the window
treatments. Washing of these fabrics has the
potential to remove the fire retardant material.
Solid Surface Top Care
(If Equipped)
The counter top is constructed of a solid surface
material that requires little care. Routine care
involves wiping the surface with a damp cloth to
remove water marks. For stains, wipe with soapy
water or non-ammonia based cleaners. Do not
use abrasive cleansers or steel wool.
Laminate Top Care
(If Equipped)
For cleaning laminate surfaces, uses mild dish
washing liquid with warm water. Use a soft
cloth for both washing and drying .
Do not use abrasive cleaners, steel wool, or gritty
cleaners or damage will occur to the surface.
Walls and Ceiling Panels
The paneling and the ceiling of your motor
home may be any of several finishes and
textures. Never use harsh detergents or abrasive
cleaners on walls or ceilings. Most surfaces
will clean with a soft cloth moistened with
mild liquid detergent in warm water, or a clear
non-ammonia window cleaner solution. Do
not scrub the surface or use large amounts of
water which could saturate the material. Simply
spray or apply the solution to the spot and blot
with a clean dry rag or paper towel. Aggressive
scrubbing may damage the texture or pattern.
WARNING
Do not use lacquer thinner, nail polish remover,
carbon tetrachloride, spot remover, gasoline, or
naphtha for any cleaning purpose. These products
may cause damage to the material being cleaned,
and may be highly flammable or poisonous .
!
NOTE
Do not seal the bottom flanges of windows and doors.
Special gaps in the sealant have been intentionally
left in the bottom flange to provide drainage.
3
Содержание American Allegiance
