American Changer AC3078, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 22

12
Menu 01 – Print Help Menu
A list of the menus and their corresponding numbers is printed by the external printer.
Menu 02 – System Info
The payout information and configuration settings are printed by the external printer. Aside from those,
the following information is also included in the System Info printout:
Software Revision
Valid1 Status*
Valid2 Status*
Hopper #1 Status*
Hopper #2 Status*
Hopper #3 Status*
Hopper #4 Status*
Credit Status*
Printer Status*
Coin Acceptor
Bill Dispense*
Temperature Info
IP Address*
Menu 03 – Button Price*
Define the amount charged for each selection (1-4).
Menu 04 – Button Payout*
Sets up payout count for the 4 selection buttons.
Menu 05 – Enable Bill*
This system only uses MDB validators. Depending on what type of MDB validator is used, the display will
only toggle between the denominations accepted by the bill validator.
Menu 06 – Payout Table*
Only bills enabled in Menu 05 will be available in this menu. Enter the # of items dispensed for each bill
denomination.
Menu 07 – Enable Hoppers
Enable or disable hoppers 1, 2, 3 and/or 4.
Menu 08 – Hopper Coin Value
Set the value of the coin being dispensed. Used only when providing tokens with change or when
selections are not in use.
Menu 09 – Enable Coin Acceptor
Select between a Pulse or ccTalk coin acceptor. Enable or disable the coin acceptor.
Pulse – Enable

High or Low
ccTalk – Enable

Coin Values