background image

1

VALICHANGER

 

             

OPERATIONS MANUAL

        

                          

SERIES AC400/500

American Changer Corp.

   

Parts & Service

:(888)741-9840

1400 NW 65

th

 Place

 

    

         Sales

:(800)741-9840

Ft. Lauderdale, FL  33309

 Fax

:(954)917-5204

Internet Address:

 

www.americanchanger.com

Service Questions?: E-mail: 

[email protected]

 

Table of Contents

SECTION A: SET-UP & INSTALLATION

Uncrating & Setup                            3

Mounting instructions

                    3-4

Filling the Hopper                             4
Using the Dump Mode                      4
Fuse                                                    4
Functional Descriptions                    5-6
Indicator Lights                                  6
Wiring definitions                             6

SECTION B: VALIDATOR
INFORMATION

                             6-13

CoinCo Flash (Error) Codes             6
AC400 JCM Validator Info              6
AC400 removing a bill jam              7
AC500 clearing a bill jam                9
Setting the CoinCo dip switches      10-11
CoinCo Validator Cleaning              12

SECTION C: TROUBLESHOOTING 
INFORMATION

                             14-16

Troubleshooting Guide                     14
Technical Flow Diagram                   15-16

SECTION E: PARTS LISTS

Parts Compact Hopper                      17
AC500 Cabinet Parts Breakdown    18
AC400 Cabinet Parts Breakdown    19
CoinCo Parts Breakdown                  20-23

CoinCo branches and Service centers
are on the back cover of this manual.

Rev. MIDI C-40 Jan”04

Specifications

Operating voltage

120 VAC +10/-15 %

Power consumpt.(controller only, add hopper and validator)10

w

Operating temperature

32 - 130 degrees Fahrenheit

Interface to Hoppers

24vdc & 12vdc 1.5 amps max.

Interface to Validators

120vac .5 amps max.

Warranty

AC 500 CoinCo BA30BAB

 Validator

The CoinCo Dollar Bill Validator is warranted for two years

from date of purchase.

AC400 JCM DBV-10

 Bill Validator is warranted for 1 year.

COVERED

¥ Defect in workmanship or material.

NOT COVERED

¥ Damage caused by physical abuse.
¥ Misapplication.
¥ Vandalism.
¥ End users attempt, on his own to repair item.
¥ Cleaning maintenance.

It is the End User’s responsibility to follow cleaning

maintenance procedure outline on page 12. Any unit coming

in for repair requiring only a cleaning will be charged a flat

rate of $65.00 plus shipping and handling

Dispensing System and Logic Board

The dispenser and logic board is warranted 

for one year from date of purchase.

COVERED

¥ Defects caused by material or workmanship.

NOT COVERED

¥ Damage caused by physical abuse.
¥ Misapplication.
¥ Vandalism.
¥ End Users attempt, on his own to repair.

A Return material authorization number (RMA#) must be

obtained before returning a unit for repair . A copy of

invoices must accompany any and all warrantee work.

 

Содержание AC 500 CoinCo BA30BAB

























Отзывы:

Похожие инструкции для AC 500 CoinCo BA30BAB