![American Bath Factory Sistine Stone Corner Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/american-bath-factory/sistine-stone-corner/sistine-stone-corner_manual_2922474011.webp)
1
3
ACCESSORIES
▫
Level
▫
Caulk
Gun
▫Silicone
▫Drill Bit
1.
Thoroughly clean the surface on which the
shelf will be adhered.
2.
Plan height for installation of the shelf. Dry fit the shelf and
sand
the
back
edge as needed to allow for a good fit.
3. You can install the shelf with silicone or the screws included:
D
Silicone Installation
: Apply silicone to the back edge of shelf
and
press
firmly in place applying even pressure. You may use
painter's
tape
to
help hold it in place while it dries. Allow to dry for
24 hours.
E
Screw Installation:
First, place
your shelf in desired location. Use a
pencil to
mark the mounting
holes.
Next,
drill out
the pilot holes.
Insert
the anchor
through pilot holes,
apply
silicone to
back
edge
of
shelf
and
then
screw shelf to wall.
4.
<RXFDQLQVWDOOWKHVRDSGLVKZLWKVLOLFRQH
:
ÀUPO\LQSODFHDSSO\LQJHYHQSUHVVXUH<RXPD\XVHSDLQWHUVWDSHWR
KHOSKROGLWLQSODFHZKLOHLWGULHV$OORZWRGU\IRUKRXUV
5.
Once silicone has fully cured, apply a bead of silicone caulk around
the
perimeter of the shelf to seal out water.
Use a wet finger to smooth the
caulk
and
then
clean off excess with a
damp
sponge.
6.
Allow to fully
dry before use.
HELPFUL HINTS :
When
figuring out the "proper"
height
for
your shelf, it's a good idea to consider
everyone
that
will use
the shower
.
Periodically
check the silicone and caulk for any wear or deterioration and correct as necessary.
Tools/Supplies
:
▫Pencil
▫Drill
▫Painter's Tape
▫Caulk
▫Phillip's Head Screwdriver
▫Sponge
▫Clean Cloth
▫Fine Grit Sandpaper
Back edge of
12"
shelf
Corner Shelves
6RDS'LVK
11
a)
Silicone Installation:
Apply silicone to the back edge of shelf and press