©
American Audio
®
- www.americanaudio.us - SDJ2™ Instruction Manual Page 15
bASIC OPErATIONS
1. LOADINg/EJECTINg AN SD CArD Or USb DEvICE
The SDJ2 can only read SDHC (High Capacity) Cards up to 16GB.
The file format is Mp3 only.
When load-
ing an SD Card into the player load with the SD Card label facing up and the contacts facing down. To remove
the card from the player gently press the card "in" until it "pops' out. When connecting a USB stick, USB card
reader, or external hard drive make sure you are correctly lined up with the USB port and gently insert the USB
connection. To disconnect a USB drive, stop playback and "pull out" the USB connection.
Please see page
8 for SD Card and USB information.
CAUTION:
•
NEvEr
attempt to remove a USB device while in PLAY mode.
•
NEvEr
attempt to eject the SD Card when in PLAY mode.
Figure 4
Figure 5:
Press the SOURCE SELECTOR BUTTON to play
from you desired audio source.
2.
SELECTING YOUR AUDIO SOURCE
Select your desired audio source using the
Source Selector button (1)
.
This button lets you toggle
between SD Card slot A, SD Card slot B and the USB port. This selector lets you choose which source
will play on either side. The LED's will verify which source is active. Red LED signifies SD slot A, green
LED signifies SD slot B, and both RED and Green LEDs glowing signifies the USB port. The different
sources can only be selected while in PAUSE mode.
Figure 5
