Model:
Q-d5 MKII, Professional 2 Channel Preamp Mixer
PoWEr SUPPLY:
AC 115/230V, 50/60Hz Selectable
DIMENSIoNS:
10”W x 12.25”D x 3.25”H /254 x 308 x 82.5 mm
WEIgHt:
6.5 Lbs. / 3 Kg
CroSSFADEr:
Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
PoWEr CoNSUMPtIoN:
15W typical, 25W w/ full headphone output
HEADPHoNE IMPEDANCE:
16 Ohms
ENVIroNMENtAL CoNDItIoN:
Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%
RH (non-condensing); Storage Temperature: -20 to 60 ˚C
Input sensitivity (Level/Impedence):
LoAD=47K oHM
LINE:
14dB (200mV)/30K Ohm ±2dB
PHoNo:
-50dB (3mV)/47K Ohms ±3dB
MICroPHoNE:
-54dB (2mV) /6K Ohms ±3 dB
AUX:
-14dB (200mV)/47K Ohms ±2dB
Output sensitivity (Level/Impedence): note: 0dbv=1vrms,
LoAD=47K oHM
MAStEr oUt (rCA):
0dBV (1V)/1K Ohm ±2dB
rEC oUt (rCA):
-10dB (316mV)/1K Ohm ±3dB
PHoNES (LoAD=32 oHMS):
-3dB (0.7V)/33 Oms ±3dB
Maximum Output (Load = 47k, thD = 5%)
MAStEr (rCA):
MORE THAN 18dB (8V)
rEC:
MORE THAN 18dB (8V)
PHoNES (Load=32 ohms):
MORE THAN 5dB (1.7V)
ChanneL baLanCe:
Within 3dB
Frequency response:
LINE:
20Hz - 20KHz, +2/-3dB
PHoNo:
20Hz - 20KHz, +2/-3dB
AUX:
20Hz - 20KHz, +2/-3dB
MICroPHoNE:
20Hz - 20KHz, +2/-3dB
Output noise (IeC-a WeIGhteD):
LINE/AUX:
LESS THAN -68dB
PHoNo:
LESS THAN -65dB
MIC:
LESS THAN -58dB
thD - total harmonic Distortion (1khz, 0db Output):
MAStEr oUtPUt (LoAD = 47K oHMS):
Less than 0.08%
PHoNo: (LoAD = 32 oHMS):
Less than 0.15%
CrOss taLk:
< 55dB @ 1Khz between left and right channels
Channel equalizer:
bASS:
+12 ±3dB / Less Than -19dB at 70Hz
MID:
+12 ±3dB / Less Than -14dB at 1KHz
trEbLE
:
+13 ±3dB / Less Than -24dB at 13KHz
Microphone equalizer:
bASS:
±12, ±2dB at 100KHz
trEbLE:
±12, ±2dB at 10KHz
Q-D5 MKII™
Specifications
©
American Audio
®
- www.AmericanAudio.us - Q-D5 MKII™ Instruction Manual Page 15
