POCKET RECORD
CONTROlS aND FEaTURES
INPUTS, CONTROLS, & FUNCTIONS
1. BUILT-IN mICROPhONe “L“ChaNNeL -
A omni condenser microphone is installed into the de-
vice as the “L” (left) channel.
2. BUILT-IN mICROPhONe “R” ChaNNeL -
A omni condenser microphone is installed into the
device as the “R” (right_ channel.
3. ReCORDINg INDICaTOR LeD -
This LED will glow during recording.
4. BUILT-IN SPeakeR -
A monitor speaker is installed, this speaker will not function when ear-
phones are plugged in.
5. BaTTeRy COveR -
Open the cover and install two AA batteries into the battery compartment.
6. BaTTeRy SeLeCT SwITCh -
When primary batteries (or Alkaline batteries) are installed, switch
to “1.5V”. When Ni-Mh rechargeable batteries are installed switch to “1.2V”.
7. vOLUme CONTROL kNOB FOR aUDIO-IN “L” ChaNNeL.
8. vOLUme CONTROL kNOB FOR aUDIO-IN “R” ChaNNeL.
9. aUDIO-IN “L” ChaNNeL -
This allows audio input of Microphone (M), Guitar (G) or Line In (L). It
provides 1.5V power supply.
10. aUDIO-IN “R” ChaNNeL -
This allows audio inputs of Microphone (M), Guitar (G) or Line In (L).
It provides 1.5V power supply.
11. aUDIO-IN SeLeCTOR -
Use this selector switch to select one of three types of audio input
types, Microphone (M), Guitar (G) or Line In (L).
©
American Audio
®
- www.americanaudio.us - TT-Record™ Instruction Manual Page 5
