©
American Audio
®
- www.americanaudio.us - M1224FX Instruction Manual Page 24
Model: M1224FX
POwER SUPPLY:
AC 115v~60Hz/230v~50Hz
Single Voltage:
AC 100V, 50/60Hz (Japan);
AC 110V, 60Hz (Colombia)
AC 120V, 60Hz (U.S.A. and Canada);
AC 127V, 60Hz (Mexico)
AC 220V, 50Hz (Chile and Argentina);
AC 240V, 50Hz (Australia)
AC 220V, 60Hz (Philippines and korea)
AC 230V, 50Hz (Europe, U.k., New Zealand, South Africa, and Singapore)
DImENSIONS:
420mm (W) x 328mm (D) x 90mm (H)
16.5” (W) x 12.9” (D) x 3.54” (H)
wEIGHT:
7.49 Lbs. / 3.4 kgs.
POwER CONSUmPTION:
36W
OPERATING TEmPERATURE:
5 to 35 deg. C; Humidity: 25 to 85% RH
(non-condensing); Storage Temperature: -20 to 60 deg. C
mAXImUm OUTPUT LEVEL (0.5% T.H.D. AT 1kHz):
+26db (Main L/R), +20db (ALT 3/4, Aux/EFX, & Control Room)
+20dB (Insert), More than 100mW (Headphones) @ 33Ω
FREQUENCY RESPONSE:
20Hz ~ 20kHz, +1/-2db (Mix L/R, ALT 3/4, Aux/EFX Send, &
Control Room)
T.H.D. (Total Harmonic Distortion):
<0.1% @ +14db 20Hz ~ 20kHz (Mix L/R, ALT 3/4, Aux/EFX
Send, & Control Room)
mAXImUm VOLTAGE GAIN:
MiC iN to MaiN L/R:
74db
MiC iN to aLT 3/4:
74db
MiC iN to aUX (PRE):
66db
MiC iN to aUX (POST):
76db
MiC iN to EFX (REv):
76db
MiC iN to CONTROL ROOM L/R:
80db
MiC iN to REC L/R:
52.2db
LiNE iN to MaiN L/R:
54db
LiNE iN to aLT 3/4:
54db
LiNE iN to aUX (PRE):
46db
LiNE iN to aUX (POST):
56db
LiNE iN to EFX (REv):
56db
LiNE iN to CONTROL ROOM L/R:
60db
STEREO iN to MaiN L/R:
44db
STEREO iN to aLT 3/4:
44db
aUX RETURN iN to MaiN L/R:
16db
TaPE iN to MaiN L/R:
20db
HUM AND NOISE [(AVERAGE RS = 150Ω) (Master Fader At Nominal Level & All Channel Faders At Minimum)]:
MiX L/R, aLT 3/4, aUX/EFX SENd, CONTROL ROOM OUT:
-127db Equivalent Input Noise, -95db Residual Noise
MiX L/R, aLT 3/4, aUX/EFX SENd, CONTROL ROOM OUT:
-88db
CHANNEL INDICATORS:
PEak:
An indicator for each channel turns on when the pre-channel fader signal is 5db below clipping.
INTERNAL DIGITAL EFFECT:
100 Selectable Presets/Foot Switch Controlable
LED mETERS:
10-Segment LEDx2, Main L/R, ALT 3/4, PFL, & Tape IN
M1224FX
SPECiFiCaTiONS
