©
American Audio
®
- www.AmericanAudio.us - LTX15BT - Instruction Manual Page 8
LTX15BT
Rear Panel Controls and Features
pops to the speakers, the mixer is turned on first and turned off last.
13. UnBaLanCeD RCa LIne InPUT – This connection is designed to accept a unbalanced line
input signal from a mixer or other line level device with a unbalanced output jack. Be sure to
connect only line level input devices such as mixers and tape machines to this jack.
14. MIC XLR InPUT – This jack will accept a XLR Input. The volume output level for this micro-
phone will be controlled by the MIC Volume knob (16).
15. Peak InDICaToR -
If this LED is lit it means that your signal is clipping. To stop the signal
from clipping lower the volume to the point where the LED is blinking along with the bass beat.
16. MIC LeveL -
This knob is used to regulate the microphone output volume. Turning the knob in
a clockwise direction will increase the volume level.
17. LIne LeveL InPUT voLUMe – This knob is used to regulate the output signal of the line level
source connected to the Line Level Input Jack (13).
18. PRevIoUS/voL - BUTTon -
Press this button once to go to the previous song. Press and
hold this button to decrease the volume of the Mp3 Player. This button is also used to scroll
through the Mp3 folders when the “FOLDER” search is activated. See PAUSE/PLAY/FOLDER
button for more information.
19. Peak InDICaToR -
If this LED is lit it means that your signal is clipping. To stop the signal
from clipping lower the volume to the point where the LED is blinking along with the bass beat.
20. MoDe BUTTon -
Press this button to switch between the flash drive and the memory card
drive.
21. FLaSH DRIve InPUT -
Plug in any Flash Drive memory stick with Mp3 files to be played.
22. MeMoRy CaRD InPUT -
This slot is used to insert a non-violatile memory card with Mp3 files
to be read.
LTX15BT
Remote Control
This remote features all of the selectable functions, so that you can easily operate your Mp3
reader at a distance of up to 3 meters from your audio installation.
1. PRevIoUS FoLDeR
2. neXT FoLDeR
3.
4. neXT TRaCk
5. PRevIoUS TRaCk
6. MeMoRy CaRD/FLaSH DRIve MoDe
7. RePeaT/RanDoM/aLL
8. voLUMe -
9. eQ SeLeCT
10. PLay/PaUSe BUTTon
8
9
10
