American Audio encore2000 Скачать руководство пользователя страница 24

Страница: 24 / 60

©American Audio® - www.americanaudio.eu Encore2000™ User Manual Page 24

(14) Source Select Button

– This button lets you toggle between

USB Port 1

USB Port 2

, &

CD Player

. This selector lets you choose which source will play on either side. The

corresponding LEDs located above the button will verify which source is active. The source
selection can only be done in

Pause Mode

. Press this button down for at least 3 seconds to

enable MIDI on the corresponding deck. Press this button again for at least 3 seconds to
disable MIDI.

(15) CUE

– Pressing the

CUE Button

during playback immediately pauses playback and

returns the track to the last set cue point (see chapter 12.8 Setting a Cue Pointon page 37).
The red CUE LED will glow when the unit is in

CUE Mode

. The LED will also flash every time a

new Cue Point is set. The

CUE Button

can be held down to momentarily play the CD. When

you release the

CUE Button

it instantly returns to the

Cue Point

(16) Scratch Button

– This button is used to activate and deactivate the Scratch effect.

(17) Search Buttons

This search button allows you to quickly scan backwards through a track.

This search button allows you to quickly scan forwards through a track.

Note

: Hold down either button and use the

Jog Wheel (11)

to rewind or forward scan at

faster speeds.

(18) Advance Track/Folder Buttons and +10 Track Skip Button

–

This button is used to select a track. Tapping this button will forward skip to

the next track, holding down this button will rapidly forward skip through the tracks.
When the

Folder Button (2)

is active, pushing this button will advance to the next

folder.

This button allows you to skip ahead by 10 tracks.

Example

: If you

are at Track #1, pressing this button will skip you to Track #11, press the button again, it
will skip to Track #21. If there are not that many tracks, it will go back to Track #1.

Pressing this button and turning the

Jog Wheel (11)

will allow you to rewind or forward

skip through tracks at a faster speed. When the

Folder Button (2)

is active, pushing this

button will skip ahead 10 folders.

This button is used to select a track. Tapping this button will back skip on

track, holding down this button will rapidly back skip through the tracks. When the

Folder Button (2)

is active, pushing this button will return to the prior folder.

(19) USB Port

– This is the USB port, where you can insert an USB stick, USB SD Card reader,

or compatible external hard drive for playback.

Содержание encore2000





























































Результаты поиска

Содержание encore2000

Отзывы:

Похожие инструкции для encore2000

Бренды по названию

Популярные бренды

American Audio encore2000, Руководство пользователя

Результаты поиска

Содержание encore2000

Отзывы:

Похожие инструкции для encore2000

Бренды по названию

Популярные бренды