©
American Audio
®
- www.AmericanAudio.us - ELS GO 15BT - Instruction Manual Page 11
ELS GO 15BT
Mounting Options
Pole Mounting –
The ELS GO 15BT also include a pole mount option.
The pole mount socket located on the bottom of the speaker may be
used to secure the speaker to a speaker tri-pod, such as the American
Audio
®
SPS-1B as illustrated on the left. Always be sure to follow the
guidelines listed below when pole mounting your speaker;
• Always be sure the stand is designed to support the weight of
the speaker
• In outdoor situations that are prone to windy conditions and
strong wind gust, be sure to use sandbags as additional tri-pod
support, this will greatly reduce the risk of tipping
• Do not stack speakers on top of each other when mounting on
a tri-pod. Only one speaker should be mounted to a tri-pod at one
time.
• Always position the tri-pod legs away from foot traffic
• Extend the tri-pod legs to their fully extended position to avoid
accidental tipping
• Observe and follow all safety guidelines and regulations specified
by the tri-pod’s manufacturer
• Be sure the tri-pod is situated on a flat, level, and stable surface
• Always tighten all tri-pod locks.
SPS-1B - Speaker Stands - American Audio
®
carries the SPS-1B speak-
er stand, which can be used to raise the speakers during use The SPS-1B
is a sturdy aluminum tri-pod and includes a mounting socket bracket for
added security. The SPS-1B can raise the speaker to a maximum height
of six feet and has a maximum weight capacity of 80 pounds. SPS-1B;
weight = 6lbs, pipe diameter - 1 3/8”
