American Audio CDI-500 MP3 Скачать руководство пользователя страница 25

Страница: 25 / 38

Figure 34

BOP EFFECT:

The Bop Effect is a stutter effect that is similar to turntable

scratching. You can use this effect to create tricks in your mixing.

JOG WHEEL TOUCH SENSITIVITY:

This function works with the SCRATCH effects. This function allows

the play and cue commands to be controled by tapping on the touch sensitive jog wheel.

ADJUSTING JOG WHEEL TOUCH SENSITVITY:

The degree of sensitivity can be adjusted to make it

more or less sensitive. Press and hold the

PITCH ON/OFF BUTTON (3)

, as your holding this button down turn

the

TIME

RATIO KNOBS (29 & 25)

clockwise. The

LCD (30)

will display the degree of sensitivity. The range

of sensitivity is from -20 to +20.

RESET JOG WHEEL TOUCH SENSITIVITY:

If the touch sensitivity does not seem to work, you can reset

the touch sensitivity. Make sure the the power is "off" on the unit, and press and hold the

PITCH ON/OFF

BUTTON (3)

, as your holding this button down turn the power "on".

When you are doing this do not touch

the jog wheel at all!

The

LCD (30)

will display the degree of sensitivity, it will reset the value automatically.

Once it displays the sensitivity value you may release the

PITCH ON/OFF BUTTON (3)

TOUCH SENSITIVE JOG WHEEL/BOP EFFECT

American Audio

- www.AmericanAudio.us - CDI-500 Mp3™ Instruction Manual Page 25

ACTIVATING TOUCH SENSITIVITY:

Before you can use the

JOG WHEEL

(13)

to control the play and cue commands you must first activate the jog

wheel touch sensitivity. To activate the touch sensitivity mode, be sure the

FX SELECT LED

is glowing green. Once the

FX SELECT LED

is glowing

green, press and hold the

SCRATCH BUTTON (19)

until it begins to flash

red repeatedly. This will activate touch sensitivity mode.

IN PLAYBACK MODE:

While in play mode and when the touch sensitivity

function is active, the

JOG WHEEL (13)

can be used to return the unit to last

cue point. Simply touch the

JOG WHEEL (13)

and unit will immediately return

to the last set cue point and playback without music interruption. Essentially
the

JOG WHEEL (13)

becomes a

BOP EFFECT

IN CUE MODE:

While in cue mode and when the touch sensitivity function is

active, tapping on the

JOG WHEEL (13)

can be used to start playback. The

unit will continue to playback until the

JOG WHEEL (13)

is released. Once the

JOG WHEEL (13)

is released the unit will return to the last cue point.

Figure 35

Figure 36

Содержание CDI-500 MP3







































Результаты поиска

Содержание CDI-500 MP3

Отзывы:

Похожие инструкции для CDI-500 MP3

Бренды по названию

Популярные бренды

American Audio CDI-500 MP3, Руководство пользователя и справочное руководство

Результаты поиска

Содержание CDI-500 MP3

Отзывы:

Похожие инструкции для CDI-500 MP3

Бренды по названию

Популярные бренды