American Audio APX12 GO BT, Руководство пользователя

Страница: 7 / 18

7
IMPORTANT SAFETY INSTRUCTIONS
LIGHTNING – For added protection for the product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power line surges.
POWER LINES – An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them might be fatal.
OVERLOADING –
Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result
in a risk of fire or electric shock.
FUSE REPLACEMENT –
Ensure that main power is disconnected prior to replacing the fuse. Replace the fuse only with
a fuse of the same rating and power, as described on the fuse panel.
OBJECT AND LIQUID ENTRY – Never push objects of any kind into this product through openings, as they may come
into contact with dangerous voltage points or short out parts that could result in fire or electric shock. Never spill
liquid of any kind of the product.
SERVICING – Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE – Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
- When the power supply cord or plug is damaged.
- If liquid has been spilled, or objects have fallen into the product.
- If the product has been exposed to rain or water.
- If the product does not operate normally by following the operating instructions. Adjust only those control that
are covered by the operating instructions, as an improper adjustment of other controls may result in damage
and may require extensive work by a qualified technician to restore the product to normal operation.
- If the product has been dropped or damaged in any way.
- When the product exhibits a distinct change in performance, indicating a need for servicing.
REPLACEMENT PARTS –
When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
SAFETY CHECK –
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
WALL OR CEILING MOUNTING – The product should NOT be mounted to a wall or ceiling.
HEAT – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Every APX12 GO BT has been thoroughly tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your units for any damage and be sure all accessories necessary to operate the system
have arrived intact. In the event that damage has been found or parts are missing, please contact our toll free
customer support number for further instructions. Please do not return the speaker to your dealer without first
contacting customer support.
APX12 GO BT HANDLING
APX12 GO BT UNPACKING