©
American Audio
®
- www.AmericanAudio.us - APX-152™/APX-PowerPro™ - Instruction Manual Page 4
APX-152™/APX-PowerPro™
Safety Precautions
• The APX-152™ and the APX-Power Pro™ loudspeakers can easily reproduce sound pressure
levels (SPL) suffi cient enough to cause sever and permanent hearing damage. A great degree of
care should be taken to protect your ears to prolong exposure to SPL in excess of 85dB.
• For adult use only - Keep out of the reach of children.
• Be sure all power amps are turned off before making speaker connections
• Do not remove the speaker cover or grill under any conditions
• Always use a power cord that meets the manufactures exact power specifi cations
• Disconnect from main power before making any type of connection
• To reduce the risk of electrical shock or fi re, do not expose this unit rain or moisture
• This speaker is intended for indoor use only, use of this product outdoors voids all warranties.
• Always mount this speaker in safe and stable matter.
• Power Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the mixer.
• Heat -The speaker should be situated away from heat sources such as radiators, heat registers,
stoves, or other mixers (including amplifiers) that produce heat
• Be sure to save the packing carton in the event the unit needs to be returned for service
• Read all documentation before attempting to operate your new mixer. Please save all your docu-
mentation for future reference
• Do not spill water or other liquids in to or on to your speaker
• Be sure that the local power outlet matches that of the required voltage for your speaker (APX-
Power Pro™ only)
• Do not attempt to operate this mixer if the power cord has been frayed or broken. Please route
your power cord out of the way of foot traffi c
• Always have the gain controls set to their lowest level during initial power-up to prevent
speaker damage
• Servicing - The user should not attempt to service the speaker beyond that described in this
manual. All other servicing should be referred to qualified service personnel. The speaker should
only be serviced by qualified personal when;
A. Objects have fallen, or liquid has been spilled into the speaker
B. The speaker has been exposed to rain or water
C. The speaker does not appear to operate normally or exhibits a change in performance
D. The terminal/cross-over plate has been damaged
APX-152™/APX-PowerPro™
Main Features
APX-152™ Passive Speaker:
• Heavy Duty Polypropylene Cabinet
• Dual 1/4” Phono Jack Connections
• Dual Speakon Type Connections
• Built-in Rigging Points
• LED Peak Indicator
• Built-in Pole Mount Socket
• High Output Two-Way System
• In and Out Jacks for Parallel Connections
• 225 Watts RMS - 900 Watts Peak Power
• Built-in Heavy Duty Carrying Handle
• Attached heavy Duty Rubber Feet
APX-Power Pro™ Speaker System:
• Heavy Duty Polypropylene Cabinet
• Dual 1/4” Phono Jack Connections
• Dual XLR Balanced Inputs
• Built-in Rigging Points
• Line Level and Mic Level Inputs
• Built-in Pole Mount Socket
• Bass and Treble Tone Controls
• In and Out Jacks for Parallel Connections
• 225 Watts RMS - 900 Watts Peak Power
• Built-in Heavy Duty Carrying Handle
• Attached heavy Duty Rubber Feet
