AMERI-CAN MACHINERY CS400, Руководство пользователя

Страница: 6 / 19

6
The machine has not been designed and built to carry out any machining other than that described in this manual. The
operator must avoid carrying out any unsafe operations or operations that are not foreseen as part of machine use and
which could compromise personal safely.
Under any circumstances mav anv machine part {attachments, boring, finishing) be modified or adapted for use with other
devices. MEPAL ITALIA S.R.L. declines all liability in the event of any malfunction caused by failure to respect the above.
Any modifications must be directly requested to and expressly authorized by MEPAL ITALIA SRL
5.4 SWITCHING OFF AND PUTTING OUT OF SERVICE
The equipment is switched off by cutting off the pneumatic and electric power supplies. The machine is put out of service
by removing the air supply pipe and protecting the inlet against dust, shavings, etc... Furthermore, the power cable must
also be removed from the mains electricity.
S
everal labels have been applied to the router to draw the operator's attention to the care to be taken when using the
machine
5.3 FORBIDDEN USE
5.5 MACHINE BOARD SAFETY LABELLING