4211-197 08-24-12
6 x 9 Waterproof Speakers
Installation Instructions
Ratings
Impendance:
4
Ω
Watts:
90W max
Min. Temperature: 32°F (0°C)
Installation
1. Cut a speaker mounting hole in the mounting surface using template (
see pages 3 & 4
).
2. Connect the speaker’s two SPK terminals to the sound source. Insure that the positive terminal
of the speaker (red
+
) is connected to the positive (
+
) terminal of the sound source.
This is very
important: if the speakers are connected out of phase the sound quality will be affected.
3.
If using the speaker’s LEDs -
Connect the speaker’s two LED terminals: connect the positive
LED terminal (red
+
) to a +12VDC control line and the negative (-) LED terminal to ground.
Front
Rear
Ground from iPod Dock/Harness
Tri12VDC from iPod Dock/Harness
Speaker (-) from iPod Harness
Speaker (+) from iPod Harness
LED Lights
