18
4.8. After Every Use: Cleaning the Milk Collection Kit
1. Remove tubing from the back-flow protector
2. Set aside tubing, it doesn’t not need to be washed after
each use— milk does not come into direct contact with it.
Take apart the remaining parts: the flange(s), valve(s),
back-flow protector(s), separating out the top, silicone and
bottom pieces, and milk storage bottle(s), including locking
ring(s) and locking disc(s).
DO NOT
wash or
boil tubing. Tubing
needs to remain
dry to avoid any
potential mold
contamination.
WARNING
ALWAYS wash hands well
with soap and water.
After every use, unless otherwise directed by your healthcare provider, prepare
the product for use as follows:
CLEANING: Cleaning with warm, soapy water.
1. RINSE any milk from pump parts with
cool water.
2. Hand WASH with warm, soapy
water, the flange(s), back-flow
protector(s), valve(s) and (if applies)
bottle(s), locking ring(s) and locking
disc(s). Wash valve(s) and back-flow
protector(s) silicone gently.
3. RINSE with warm, clean water the
flange(s), back-flow protector(s),
valve(s) and (if applies) bottle(s), locking
ring(s) and locking disc(s).
4. Air DRY each part on a clean surface.
*Pump parts may vary.