AMEC CAMINO-108S, Руководство пользователя

Страница: 30 / 35

30
slower than 2 knots. To add to this, if the receiving party is using non-standard
dual channel receiver (a single channel receiver), then in perfect conditions, the
receiver will get your full static information every 12 minutes and your MMSI and
dynamic information every 6 minutes if you are moored.
No data is being received by chart plotter, why?

Please check that the power supply is connected correctly at CAMINO-108S.

Please check that the power supply is 12V or 24V with sufficient current capacity
(no less than 2A).

Please make sure that the connections between CAMINO-108S to the chart plotter
are correct (baud rate, polarity, NMEA format etc.).
My MMSI is being received by other vessels but my vessel name is not shown on their
chart plotter or PC, why?

Older software and AIS displays may not be fully compatible with Class B
transponders. In some of these cases, older equipment might only have Class B
vessel show up on their displays with just MMSI number without the vessel name.
This is usually due to the receiving device not knowing how to process the
Message 24 static data from Class B transponders. Please contact the chart plotter
maker and ask for software upgrades (for these older chart plotters) to resolve this
issue.
It´s to notice that the VHF and AIS transmission range is reduced, why?

CAMINO-108S has up to 1dB insertion loss on transmission path both for AIS and
VHF. Therefore it´s normal to have a slight reduction in transmission range.
If you still encounter difficulties to set up or operate CAMINO-108S correctly, please
email to
service@alltekmarine.com for further instructions.