5.6 RECORD SETUP
RECORD SETUP
HDD CLEAR
HDD FULL
RECORD MODE
RECORD TYPE
RECORD SPEED
PRIORITY MODE
SELECT , PRESS
: NO
: OVERWRITE
: TIMER
: FIELD
: 60FPS
: NONE
1
2
3
4
5
6
SYSTEM SETUP
DISPLAY SETUP
CAMERA TITLE
TIME/DATE SETUP
ALARM/MOTION
SETUP
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY DEFAULT
HDD CLEAR
HDD FULL
RECORD MODE
RECORD TYPE
RECORD SPEED
PRIORITY MODE
(1) HDD CLEAR : If YES is selected, it deletes content of the HDD.
※
All contents of the HDD is deleted and cannot be restored.
As times go by, HDD in a DVR unit will have bad sectors one after the
other. Pictures to be recorded in bad sectors shall be damaged, and you
will see incomplete pictures whenever you replay. However, our DVR unit
operates normally even though there is some bad sectors in hard disk
drives.
(2)HDD FULL : Select OVERWRITE or STOP RECORD. If OVERWRITE is
selected, it delete previous contents on HDD to overwrite when HDD is full.
(3)RECORD MODE
1 TIMER : Records by time.
T IMER+ALARM : Records by time or when the ALARM comes in. (POST -ALARM Functionality)
2
MOT ION+ALARM : Records by MOT ION or when the ALARM comes in.
MOT ION : Records only when MOT ION is detected.
4
3
(4)RECORD TYPE
1
2
2
FIELD : Records images from each camera in rotation
60 fields/sec at 720X240 resolution
Selected for higher resolution recording.
total 60 fields/sec.
Select for moving picture level recording.
(5)RECORD SPEED : Adjusts recording frame rate : 0.1 indicates 1 field per 10
seconds.(60/30/15/10/5/2/1/0.5/0.2/0.1 FPS)
(6)PRIORITY MODE : Assigns recording priority of a specific channel.
NONE : Each of 1,2,3,4 does not have priority.
1 : Gives priority to #1 camera, and records in the sequence of 1-2-1-3-1-4-1-2….
1
2
3 1,2 : Gives priority to #1 and #2 cameras, and records in the sequence of 1-2-3-1-2-4-1-
- 30 -