AME Fasy-Flate 24868, Руководство пользователя

Страница: 6 / 12

6
LCD Display
1. Unit display
2. Pressure display
3. Function select display
4. Working indicator
Function and Operation
This device includes the OPS
(Over Pressure Setting) function used to
inflate and seat t
i
res on the rim.
Operation
SET OPS
KPA
BAR
PSI
KGF
2 . Set OPS (Over Pressure Setting)
2 .1. Press (SET) once, (SET) and (OPS)
will be shown on the LCD screen,
(OPS) will be flashing.
2
.2. Press (+) or (-) to choose the
OPS value.
2 .3. Press (SET) to confirm. If
OPS value is not zero, (OPS) will
be displayed at the LCD screen.
3 . Manual inflation
If t
i
re pressure is lower than 3 p.s.i. or 0.2
bar, the device will not start automatically.
3 .1. Press (SET) t wice , the
current pressure will be shown
on the LCD screen.
3
.2
.
Press (+) to start manually.
4
. Set programmable buttons
(P1) initial value is 15 p.s.i. /1 bar, (P2)
initial value is 30 p.s.i. /2.1 bar. The preset
pressure value can be reset by the user,
setting it here will save it for following
usage. But it reverts to the initial value
after a unit set change.
1. Press (P1) or (P2), (P1) preset value or
(P2) preset value will be shown on the
LCD screen.
2. Press (+) or (-) to choose preset
pressure value.
3. Press (SET) to confirm.
1.
Unit select
Device has four units can be chosen by the
user which is kpa-psi-bar-kg/cm2.
Unit set here will become default unit for
following usage, do not need to set unit
each time.
1.1. Press (SET), (SET) will be shown
on the LCD screen, and the unit
will be flashing.
1.2. Press (+) or (-) to choose the
unit.
1.3. Press (SET) to confirm.