8
Boundary Scan Specification
This chapter contains information on boundary scan specifications as they apply to
"Vega 10". To go to a topic of interest, use the following list of linked cross-references:
•
•
•
JTAG Interface Signals (p. 77)
•
JTAG Timing Characteristics (p. 78)
8.1 Introduction
"Vega 10" has a JTAG 1149.1 compliant TAP controller. The boundary scan implementation is
IEEE compliant. The implementation supports BYPASS, EXTEST, and PRELOAD instructions.
A BSDL file for each of the modes can be obtained from the AMD OEM Resource Center.
8.2 Boundary Scan
The "Vega 10" boundary scan can perform board-level capture and drive out on all
pins mentioned in the BSDL file.
8.3 JTAG Interface Signals
Table 8–1 JTAG Interface
Pin-name
I/O
Description
JTAG_TCK
I
TCK: Test clock.
JTAG_TMS
I
TMS: Test mode select.
JTAG_TDI
I
TDI: Test data in.
JTAG_TDO
O TDO: Test data out.
JTAG_TRSTB
I
TRST#: Test asynchronous reset.
TESTEN
I
Compliance pin: Pull up to 3.3 V to enable JTAG access.
©
2017
Advanced Micro Devices, Inc.
AMD Confidential - Do not duplicate.
"Vega 10" Databook
56006_1.00
Содержание Vega 10
