AMD Geode™ SC2200 Processor Data Book
201
Core Logic Module - Bridge, GPIO, and LPC Registers - Function 0
32580B
Index 40h
PCI Function Control Register 1 (R/W)
Reset Value: 39h
7:6
Reserved.
Must be set to 0.
5
Reserved.
Must be set to 0.
4
PCI Subtractive Decode.
0: Disable transfer of subtractive decode address to external PCI bus. External PCI bus is not usable.
1: Enable transfer of subtractive decode address to external PCI bus. Recommended setting.
3
Reserved
. Must be set to 1.
2
Reserved
. Must be set to 0.
1
PERR# Signals SERR#.
Assert SERR# when PERR# is asserted or detected as active by the Core Logic module (allows
PERR# assertion to be cascaded to NMI (SMI) generation in the system).
0: Disable.
1: Enable.
0
PCI Interrupt Acknowledge Cycle Response.
The Core Logic module responds to PCI interrupt acknowledge cycles.
0: Disable.
1: Enable.
Index 41h
PCI Function Control Register 2 (R/W)
Reset Value: 00h
7:6
Reserved.
Must be set to 0.
5
X-Bus Configuration Trap.
If this bit is set to 1 and an access occurs to one of the configuration registers in PCI Function
5 (F5) register space, an SMI is generated. Writes are trapped; access to the register is denied. Reads are snooped; access
to the register is allowed.
0: Disable.
1: Enable.
Top level SMI status is reported at I/O Offset 00h/02h[9].
Second level SMI status is reported at I/O Offset 04h/06h[5].
4
Video Configuration Trap.
If this bit is set to 1 and an access occurs to one of the configuration registers in PCI Function 4
(F4) register space, an SMI is generated.Writes are trapped; access to the register is denied. Reads are snooped; access to
the register is allowed.
0: Disable.
1: Enable.
Top level SMI status is reported at I/O Offset 00h/02h[9].
Second level SMI status is reported at I/O Offset 04h/06h[5].
3
Audio Configuration Trap.
If this bit is set to 1 and an access occurs to one of the configuration registers in PCI Function
3 (F3) register space, an SMI is generated. Writes are trapped; access to the register is denied. Reads are snooped; access
to the register is allowed.
0: Disable.
1: Enable.
Top level SMI status is reported at I/O Offset 00h/02h[9].
Second level SMI status is reported at I/O Offset 04h/06h[5].
2
IDE Configuration Trap.
If this bit is set to 1 and an access occurs to one of the configuration registers in PCI Function 2
(F2) register space, an SMI is generated. Writes are trapped; access to the register is denied. Reads are snooped; access
to the register is allowed.
0: Disable.
1: Enable.
Top level SMI status is reported at I/O Offset 00h/02h[9].
Second level SMI status is reported at I/O Offset 04h/06h[5].
1
Power Management Configuration Trap.
If this bit is set to 1 and an access occurs to one of the configuration registers in
PCI Function 1 (F1) register space, an SMI is generated. Writes are trapped; access to the register is denied. Reads are
snooped; access to the register is allowed.
0: Disable.
1: Enable.
Top level SMI status is reported at I/O Offset 00h/02h[9].
Second level SMI status is reported at I/O Offset 04h/06h[5].
Table 6-29. F0: PCI Header/Bridge Configuration Registers for GPIO and LPC Support (Continued)
Bit
Description
Содержание Geode SC2200
