41
Caution!
For optimal performance, and for ATI Overdrive,
Overclock, and CrossFire™ configurations, for each CrossFire™
graphics card use one 2×3-pin and one 2×4-pin PCIe™ power
connector on a 750 watt or better power supply. For more
information, see
Force Full Performance
in the ATI Catalyst™
Control Center.
Note:
Your computer will beep, possibly show a warning message on
your display, and the boot process will stop if the graphics card is not
correctly connected to the power supply.
10
Install the CrossFire™ bridge interconnects.
Caution!
Always handle the CrossFire™ bridge interconnects by the
connector only. Do not push or pull on the flexible circuit cable.
Proper handling of the CrossFire™ bridge interconnects
a) Remove protection tags from the connectors at each end of the
CrossFire™ bridge interconnects.
b) Press one end of the CrossFire™ bridge interconnect onto one of
the connections on one of the graphics cards.
c) Press the opposite end of the CrossFire™ bridge interconnect
onto the corresponding connection of the second graphics card.
d) Repeat steps b and c above to connect the second CrossFire™
bridge interconnect to the graphics cards.
11
Fasten the graphics card securely. Make sure the cables are not
interfering with anything inside the computer (for example, a cooling
fan) and replace the computer cover.
12
Reconnect any cables you have disconnected and then plug in the
computer and monitor power cords.