28
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most
effectively save energy saving while operating in a manner consistent with your own
style of computer use.
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Power Management Setup
Power Management Feature
Help Item
Power management/APM Enabled
Suspend Time Out Disabled
Power Button Mode On/Off
Video Power Down Mode Suspend
Hard Disk Power Down MODE Suspend
Hard Disk Time Out (Minute) Disabled
Power On by PCI Card Disabled
Wake-up by PCIE Disabled
RTC Resume Disabled
Disable/Enable
RTC to generate a wake event
↑↓
: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1: General Help
F5: Discard Charges F6: Standard Defaults F7: Optimized Defaults
Power Management/APM
Use this item to enable or disable SMI based power management and APM support.
Suspend Time Out
If it is set Enabled and no activity during this time period, the BIOS will place the
system into suspend low power state. The optional settings are: Enable; 1~64
minutes.
Power Button Mode
Select Power button functionality.
Video Power Down Mode
The optional settings are: Disabled; Standby and Suspend.
3-9 Miscellaneous
Control
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Miscellaneous Control
Advanced PCI/PnP Setting
Help Item
WARNING: Setting wrong values in below sections may cause
system to malfunction
Clear NVRAM No
Plug &Play O/S No
PCI Latency Timer 64
Allocate IRQ to PCI VGA Yes
Palette Snooping Disabled
PCI IDE Bus Master Enabled
Off Board PCI/ISA IDE Card Auto
IRQ Resources Press Enter
Options
Clear NVRAM during System Boot
↑↓
: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1: General Help
F5: Discard Charges F6: Standard Defaults F7: Optimized Defaults
Plug &Play O/S
The optional settings are: No; Yes
No: Let the BIOS configure all the devices in the system.