manualshive.com logo in svg

AMD Am79C930, Предварительное руководство

AMD Am79C930 - устройство сетевого интерфейса, предназначенное для высокоскоростной передачи данных. Для получения подробной информации о настройках и использовании устройства, скачайте предварительное руководство пользователя бесплатно с manualshive.com. Узнайте больше о функциях и возможностях этого продукта.

Поделиться
Скачать
background image

 

PRELIMINARY

This document contains information on a product under development at Advanced Micro Devices. The
information is intended to help you evaluate this product. AMD reserves the right to change or discontinue
work on this proposed product without notice.

Publication#  20183 Rev: B Amendment/0
Issue Date:  April 1997

1

 

Am79C930

 

PCnet™-Mobile 
Single-Chip Wireless LAN Media Access Controller

 

DISTINCTIVE CHARACTERISTICS

 

■

 

Capable of supporting the IEEE 802.11 standard 
(draft)

 

■

 

Supports the Xircom Netwave™ media access 
control (MAC) protocols

 

■

 

Supports MAC layer functions

 

■

 

Individual 8-byte transmit and 15-byte receive 
FIFOs

 

■

 

Integrated intelligent 80188 processor for MAC 
layer functions

 

■

 

Glueless PCMCIA bus interface conforming to 
PC Card standard—Feb. 1995

 

■

 

Full PCMCIA software interface support for PC 
Card standard—Feb. 1995

 

■

 

Glueless ISA (IEEE P996) bus interface with full 
support for Plug and Play release 1.0a

 

■

 

Glueless SRAM interface for MAC operations, 
supporting up to 128 Kbytes of memory

 

■

 

Glueless Flash memory interface, supporting 
up to 128 Kbytes of non-volatile memory for 
MAC control code, PCMCIA configuration 

parameters, and ISA Plug and Play 
configuration parameters

 

■

 

Provides integrated Transceiver Attachment 
Interface (TAI), supporting Frequency-Hopping 
Spread Spectrum, Direct Sequence Spread 
Spectrum, and infrared physical-layer 
interfaces

 

■

 

Antenna diversity selection support

 

■

 

Fabricated with submicron CMOS technology 
with low operating current

 

■

 

Supports dual 3 V and 5 V supply applications

 

■

 

Low-power mode allows reduced power 
consumption for critical battery-powered 
applications

 

■

 

144-pin Thin Quad Flat Pack (TQFP) package 
available for space-critical applications, such as 
PCMCIA

 

■

 

JTAG Boundary Scan (IEEE 1149.1) test access 
port for board-level production test

 

GENERAL DESCRIPTION

 

PCnet-Mobile (Am79C930) is the first in a series of mo-
bile networking products in AMD’s PCnet family. The
Am79C930 device is the first single-chip wireless LAN
media access controller (MAC) supporting the IEEE
802.11 (draft) standard and the Xircom Netwave™
MAC protocols. The Am79C930 device is designed to
have a flexible protocol engine to allow for industry
standard and proprietary protocols. Protocol firmware
for Xircom Netwave and IEEE 802.11 (draft) MAC pro-
tocols are supplied by AMD. It is pin-compatible with
the PCMCIA bus or the ISA (Plug and Play) bus
through a pin-strapping option.

The Am79C930 device contains a PCMCIA/ISA bus
interface unit (BIU), a MAC control unit, and a

transceiver attachment interface (TAI). The TAI sup-
ports frequency-hopping spread spectrum, direct
sequence spread spectrum, and infrared physical layer
interfaces. In addition, a power down function has been
incorporated to provide low standby current for power-
sensitive applications.

The Am79C930 device provides users with a media ac-
cess controller that has flexibility (i.e., bus interface,
protocol, and physical layer support) to allow the
design of multiple products using a single device. By
having all the necessary MAC functions on a single
chip, users only need to add memory and the physical
layer in order to deliver a fully functional wireless LAN
connection.

Содержание Am79C930


































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Am79C930

Eaton AMPGARD RVSS Instruction For Installation And Maintenance preview
AMPGARD RVSS
Бренд: Eaton Страницы: 16
QCON ProX Setup preview
ProX
Бренд: QCON Страницы: 4
Canarm MC Series Installation Manual preview
MC Series
Бренд: Canarm Страницы: 3
Harpo BraillePen 12 Quick Start Manual preview
BraillePen 12
Бренд: Harpo Страницы: 35
Hardi HC 6500 Quick Manual preview
HC 6500
Бренд: Hardi Страницы: 2
Samson 3277 Quick Manual preview
3277
Бренд: Samson Страницы: 2
Valcom V-2000 Manual preview
V-2000
Бренд: Valcom Страницы: 6
Zamel Extra Free RZB-02 Quick Manual preview
Extra Free RZB-02
Бренд: Zamel Страницы: 2
PSC Solar YQPV-HP360V/100A Installation And Operating Instructions Manual preview
YQPV-HP360V/100A
Бренд: PSC Solar Страницы: 22
Sparkfun Electronics Explorer Dongle Manual preview
Explorer Dongle
Бренд: Sparkfun Electronics Страницы: 16
Jetter JVM-104-O09 User Manual preview
JVM-104-O09
Бренд: Jetter Страницы: 62
Zamel exta life SRM-22 Operation Manual preview
exta life SRM-22
Бренд: Zamel Страницы: 5
Jetter JCM-521 Installation Manual preview
JCM-521
Бренд: Jetter Страницы: 30
Eaton Intelligent Power Controller 3000 Installation And Quick Start Manual preview
Intelligent Power Controller 3000
Бренд: Eaton Страницы: 2
Advantech LNC-5800D Hardware Maintenance Manual preview
LNC-5800D
Бренд: Advantech Страницы: 46
HANYOUNG NUX TPR-3M Instruction Manual preview
TPR-3M
Бренд: HANYOUNG NUX Страницы: 2
Omega MICROMEGA CN77000 series User Manual preview
MICROMEGA CN77000 series
Бренд: Omega Страницы: 104
American DJ GALATIC STAR 19C User Instructions preview
GALATIC STAR 19C
Бренд: American DJ Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды