AMD DIrect SSRFR-15W, Руководство пользователя

Страница: 6 / 9

3
15” & 24” WINE COOLER USER MANUAL
4
CLEANING & MAINTENANCE OPERATING INSTRUCTIONS
It is recommended that you install the appliance in a place where the ambient temperature is between 16°C(~61
° F) - 32°C(~9Q° F). If the ambient temperature is above or below recommended temperature, the performance
of the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause
interior temperatures to fluctuate. The operation temperature range may not be reached.
SSRFR-15W/SSRFR-24W
1. Power: Press and hold to enable or disable power
to the unit, even while the unit is still plugged in.
2. Control Lock: Press and hold the power and
light buttons simultaneously to lock or unlock
the control panel. When the panel is locked, no
buttons will work other than the unlock function.
3. Lights: Press to turn the interior light on or off.
4. Display: Shows the currently set target
temperature.
5. Temperature Increase: Press once to increase
temperature by 1 ° F.
6. Temperature Decrease: Press once to decrease
temperature by 1° F.
7. Celsius/Fahrenheit Switch: Press and hold
both temperature buttons to switch the display
temperature between Celsius and Fahrenheit.
SSRFR-15W/SSRFR-24W
1. Switching the cooler on/off: Press and hold the
power button for 6 seconds to switch the wine
cooler ON/OFF.
2. Temperature settings: The preset temperature
is 8 °C(46.4 °F) in the upper zone and 12 °C(S3.6
°F) in the lower zone. Press the + or - buttons for
the appropriate zone until required temperature
shows in the display. The display shows set
temperature when the cooler is on. To change the
temperature display from Celsius to Fahrenheit
or Fahrenheit to Celsius, press and hold keys
4+5 for 2 seconds. The display will show the set
value, °C/°F.
3. Light: Press the light button to switch the light ON
or OFF. To turn the light ON when the door opens,
press the light button for 6 seconds, the display
will show “OP”, which means door control function
is ON. To turn the light function OFF, press the
light button for 6 seconds, the display will show
“CL”, which means the door control function is
OFF.
4. Lock/unlock display: Press power button and +
button at the same time for one second to lock/
unlock all buttons on the panel.
5. Door alarm: The wine cooler is equipped with an
alarm that will sound if the door is left open for
more than 60 seconds. Close door or press any
key to mute the alarm.
6. Defrosting: The wine cooler will defrost
automatically every 4 hours for 20 minutes. During
defrost, the compressor stops, but the fan will
keep running.
7. Lowest Temperature Setting: The lower zone can
be set as low as 54°, and the upper section can be
set as low as 39°
CONTROL PANEL
• Turn off the power, unplug the fridge, and remove
all items, including shelves.
• Wash the inside surfaces with a solution of warm
water and baking soda
• (about 2 tablespoons of baking soda per 4 cups
of water).
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth
before cleaning the area where the controls are
located, or any place on or near electrical parts.
• Wash the outside of the fridge with warm water and
a mild liquid detergent. Rinse well and wipe dry
with a clean, soft cloth.
• Use an approved stainless steel cleaner to clean
the door frame and handle. Do not use steel wool
or a steel brush on the stainless steel.
Most power failures are corrected within a few hours
and they should not affect the temperature of your
fridge, as long as you avoid opening the door. If the
power is going to be off for a longer period of time,
it is recommended that you transfer all perishable/
sensitive contents to a functional fridge or cooler. To
prevent odor and mold growth, leave the door open
slightly, blocking it open if necessary. Lay a towel
down below the open front of the fridge in case any
frost buildup melts and drains out.
1. Remove all contents.
2. Securely tape down all loose items (shelves) inside
your appliance.
3. Turn the adjustable legs up to the base to avoid
damaging them.
4. Tape the door shut.
5. Be sure the fridge stays secure in an upright
position during transportation. Also, protect the
outside of the appliance with a blanket or similar
item.
• The appliance should be placed in the coolest
location possible, away from heat-producing
appliances and out of direct sunlight.
• Ensure that the unit is adequately ventilated. Never
cover air vents.
• Do not keep the door open any longer than
necessary.
• Let hot foods cool to room temperature before
storing them in the fridge.
• Do not overload the fridge, as it forces the
compressor to run more frequently, increasing the
power consumption.
• Be sure to wrap foods properly, and wipe
containers dry before placing them in the fridge, in
order to prevent frost buildup.
• Do not line shelves with aluminum foil, wax paper
or paper towels, as they will prevent proper air
circulation.
Short vacations: Leave the fridge running during
vacations that are shorter than three weeks.
Long vacations: If the fridge will not be used for a
month or more, remove all items and turn it off. Clean
and dry the interior thoroughly. To prevent odor and
mold growth, leave the door open slightly, blocking it
open if necessary. Lay a towel down below the open
front of the fridge in case any frost buildup melts and
drains out.
CLEANING YOUR FRIDGE
POWER FAILURE
MOVING YOUR APPLIANCE
ENERGY SAVING TIPS
VACATION TIME
Failure to unplug the fridge during cleaning
could result in electrical shock or other personal
injury.
CAUTION