20
Note:
Make sure to toggle the
NTP
toggle switch to the off position if you do not want to sync
your device to an NTP server.
Holiday
This screen allows the user to set and modify holiday settings which allows the NVR to record or
send snapshots based on specific schedules set by the user. Please note, a holiday record /
snapshot setup has a higher priority than an ordinary date record/snapshot setup plan. Below is
a screenshot of the Holiday settings screen:
To add a holiday schedule to your NVR, click on the
Add Holidays
button. This will take you to
an “Add Holidays” screen. Name the holiday you would like to add and select a mode, range,
start time, and end time. If you would like to add more holidays, click on the
Add More
toggle
switch, and repeat the process. Click
Add
to add the holiday(s). Click
Next
to continue.
Network
The next screen that appears will be the
Network,
or TCP/IP screen.
Unless you have a specific
reason to change these settings, it is best to leave them as they are.
Please note,
the IP address
for the NVR will be the
address used to access your NVR’s web user interface on a laptop or
PC
.
